oxwhite11

They will look like my old retro's but my halos were white. Me personally would have went with the 55watt bulbs and bal.



Old that are now in a million pieces



My new ones with Apollo 3's and also. 3" lens

rls365

Looking for a little advice here. I recently got a complete set of retrofits but during shipping the shroud popped off the fx-r projector on the one headlight. I think it will just snap back into place but obviously im going to have to take lens off to get to it. Looks like the lenses were put back in with black RTV and not butyl tape. Can you still bake that or do u need to cut it all out somehow?

Yuke's Retrofits

I would scrape it off the outside of the seam and if possible use a heat gun to open it.

It might just be on the outside. For example I seal all my lights with butyl and then out a bead of dynaflex on the outside for added protection. Its not silicone. Silicone is not good for retrofits as it releases gasses.

5.ohh

well after reading all 92 pages on this thread, i found a guy from houston, tx selling a retrofit headlight set for 60$ so my friend will be getting them for me and shipping them to me since hes local to the guy. and for 60$ i said f*ck it ill try them but after reading all the pages in starting to think why he took them off and selling for 60$. he told me he took them off because they leaked, but i dont care about that cuz im still gonna open them to PTM to my truck color. im starting to stress myself on why hes letting them go for 60$ :/ i wont know til next week when my friend gets them this sunday and sends them my way.

MGD

But - they only leak a little



Seriously - how about asking him to send yall some pics? $60 sounds awfully low. What's inside 'em?

11rangerZ520

I'm really wanting a set of retrofits but I don't want to worry about having problems with a headlight. I also want my auto feature to work and from what I understand it doesn't always work with retros.

DavidSchlot822

[MENTION=50188]kws148[/MENTION] How. Did. You. Do. This?? I'm building my lights this weekend and I want to do my reflectors like that too.

kws148

I had some F-150 decals made from a forum member on here. I put the decals on the reflectors then used Nightshades over the reflectors. I applied 4 coats then removed the decals after it dried of course then applied 2 more coats of Nightshades to kinda give the F-150 a ghosted effect. Then I put 5 coats of clear over everything and polished after all was dry.

DavidSchlot822

Ok cool, thanks man I appreciate it. How much were they? Who made them for you?

kws148

His name on here is kidastra. Send him a pm and he will get you set up.