This is that retrofit thread we talked about!
#611
I'm at the dealer now, they can easily turn off daytimers.... Help !!
#612
Done. Tech had it figured out.
#613
Help - I have morimoto h1 mini, 3Five 4300k retro/projector kit from TRS, have had it for about 6 months. Nothing but problems.
TRS finally sent me a new set of ballasts under warranty to resolve the problem... Sometimes one headlight turns on, sometimes the other, sometimes both prior to new ballasts,
Installed new ballasts, and new bulbs (had extra set from day 1).
So... Now my drivers bulb turns on, most of the time, passenger side doesn't turn on. I wish I could return whole kit, but been declined (?).
So... If all the ballasts and bulbs are good, and physcial connections have been checked/wiggled, where am I going wrong?
Where the hid harness plugs into truck headlight harness, can anyone confirm/deny my wires are correct? Any advice please..
TRS finally sent me a new set of ballasts under warranty to resolve the problem... Sometimes one headlight turns on, sometimes the other, sometimes both prior to new ballasts,
Installed new ballasts, and new bulbs (had extra set from day 1).
So... Now my drivers bulb turns on, most of the time, passenger side doesn't turn on. I wish I could return whole kit, but been declined (?).
So... If all the ballasts and bulbs are good, and physcial connections have been checked/wiggled, where am I going wrong?
Where the hid harness plugs into truck headlight harness, can anyone confirm/deny my wires are correct? Any advice please..
#614
This is plugged into passenger side in front of battery
#615
Removed relay, and plugged hid harness into factory bulb harness , lights worked ok on auto setting until I manually turned lights on... Now only drivers light works
#616
I really wish I could upload my videos to show you how difficult this is becoming
#617
If anyone is willing to watch my video clips of lights working/failing, please PM me your email address.
#618
If you have them on auto I wonder if the voltage drop during crank is causing issues
Don't use auto - leave them off until AFTER you start the truck - same problem?
Don't use auto - leave them off until AFTER you start the truck - same problem?
#619
Beer Gut Extraordinaire
I have never seen so many posts in a row by one person.
#620
Which is basically the core problem. It's hit and miss, intermittent issue, and has left us stranded in the dark...
Ready to go back to trust worthy halogens... Almost.
I'll try lights again tomorrow and see how they react.