Removing mirror caps
#1
Truckin' again
Thread Starter
Removing mirror caps
I did a search - and found that there are 4 clips that hold on the mirror caps. I just was curious if anyone had any tips to remove the mirror caps - other than take my time. Should I start on the inside, outside, top, bottom? Thanks in advance.
#2
I started in from the top - that seemed easiest for me.
#4
ℳℴↁ℮ℜ@大☢®
the CORRECT proceedure would be to pop the mirror out
remove the four torx screws that hold the front cover/cap on
and then there's just four tabs that you can depress and the cap pops right off
I'm not quite sure that you'd be able to reach those 4 tabs from the outside very easily, not without scaring up the rest of the mirror cover
I'd be too scared to just go prying around it; might break those tabs off completely
search for the "mirror blinker" mod thread; there's a few more pics in there
remove the four torx screws that hold the front cover/cap on
and then there's just four tabs that you can depress and the cap pops right off
I'm not quite sure that you'd be able to reach those 4 tabs from the outside very easily, not without scaring up the rest of the mirror cover
I'd be too scared to just go prying around it; might break those tabs off completely
search for the "mirror blinker" mod thread; there's a few more pics in there
#5
Truckin' again
Thread Starter
Wow, that seems much more difficult than I was expecting. They look like they can just "pop" off. I gotta take the mirror off??
Last edited by 2009XLTBFF1fitty; 05-21-2010 at 10:35 PM.
#6
Truckin' again
Thread Starter
Thanks superbleeder - I found the thread by Dark Wizard. It seems as though removing the glass to get to the mirror cap isn't that difficult. I will check it out tomorrow.
#7
ℳℴↁ℮ℜ@大☢®
the mirror popping off is the hardest and most nerve racking part; I had to study it for a bit before I got the courage to attempt it... but once you figure it out on the first side, the other side's a breeze
take your time on the mirror step; that's pretty much the only thing you could break in the process, lol, the rest is a peice of cake
take your time on the mirror step; that's pretty much the only thing you could break in the process, lol, the rest is a peice of cake
Trending Topics
#8
Senior Member
Yes, you're going to want to remove the mirror first. Those clips on the caps are way too sensitive, I almost broke one off trying to put them back on without having to pull the mirror off. Once you find the spot on them mirror where you need to start with the screwdriver, it's super easy.