Waterfowler41

iTrader: (1)

I have a piece of aluminum flat bar I'm going to use to make a raptor grill light set up for my truck and was curious what the spacing was between each of the three lights. Tried searching all over the place, only saw one post about it being 7" OC.

Can someone out in the interwebs confirm please?

Munson

Not sure if this is any help but that's how I did mine

Waterfowler41

iTrader: (1)

How far apart are your lights and is that a diy or did you buy a premade kit? Looks nice. More details if you don't mind sharing.

freddyttt

why not just buy one-.

https://www.f150forum.com/f38/f150li...ht-kit-289181/

Waterfowler41

iTrader: (1)

The aluminum flat bar 3' cost me $8, the lights are $6/piece, I have plenty of wire hanging around, and to be honest I love building my own stuff when I can it's part of the fun of upgrading my truck! Check out my diy light harness I did a how to for in the lighting section. I'm a mech. engineer by trade.

So... You got dem measurements?

RogueGT

A mech. engineer and you need someone else's measurements?? Come on just "pry" open your wallet and buy one.
http://www.stage3motorsports.com/200...lle-Light.html

Waterfowler41

iTrader: (1)

Meh more of a measurement confirmation, 7" o.c.

Those kits are both nice and great for someone who prefers a premade kit. I haven't read a single complaint about either kit but like I said above, I have a lot of fun building things like this.

So...anyone have measurements or confirmation of my assumption that it's 7" OC?

Greywalls

I don't have the measurements; however, I agree that ~7" looks right. At least, that is what I would build mine to, based on my grill configuration. Fun project!

Waterfowler41

iTrader: (1)

Thank you very much!

gDMJoe

As per the OEM Raptor grille .....

• the outer-most lights are 15-1/8" from the outside edge of the grille.
  .
• the center light is 9¼" from either of the outside lights.
  
  *All measurements are on-center.