When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
So I decided to try and put an LED light bar behind the grille of my '13 stx 4x4... So here is what I did:
Cut a metal unistrut to 32"
Brought 2 "L" metal corner braces from Home Depot, drilled out the holes to fit larger bolts
Used 4, 14mm bolts
So it did this as a proof of concept, so I still need to trim, drill a smaller hole to stabilize the side braces, wire the light up to the battery, run a switch to the cab and spray some undercoat of the whole assembly. Oh, and of course a bigger Light Bar!
Let me know what you guys and gals think! Here are some pics:
Last edited by Diabolicmuffin63; 07-31-2014 at 06:23 PM.
07-31-2014, 05:52 PM
) to 32"