Post Your 2WD Leveled Trucks
#421
Senior Member
I'm looking to run a 4" lift spindle and can't decide between 33's or 35's. I've jacked the truck up to the correct height, but 35's are a squeeze.
Do you have front fender measurements from ground to fender lip? Thanks in advance!
#422
You're truck looks awesome! How much front/rear lift are you running to clear the 35's like that?
I'm looking to run a 4" lift spindle and can't decide between 33's or 35's. I've jacked the truck up to the correct height, but 35's are a squeeze.
Do you have front fender measurements from ground to fender lip? Thanks in advance!
I'm looking to run a 4" lift spindle and can't decide between 33's or 35's. I've jacked the truck up to the correct height, but 35's are a squeeze.
Do you have front fender measurements from ground to fender lip? Thanks in advance!
#425
#426
Before:
After:
2.5in Rough Country front level for my 2014 FX2. Tires are Goodyear Wrangler HP 275/60/R20. Very happy with the results.
After:
2.5in Rough Country front level for my 2014 FX2. Tires are Goodyear Wrangler HP 275/60/R20. Very happy with the results.
Last edited by TigerStripes; 06-05-2016 at 09:39 AM. Reason: Added a before pic
#427
2.5" front with 2" rear all from AutoSpring 305/55/20 Hercules ATII, has a rake of about 1.5"
Previously had white 2012 FX2 with 2" front AutoSpring and OE 4X4 block. 33x12.50R20 General Grabber AT2
Previously had white 2012 FX2 with 2" front AutoSpring and OE 4X4 block. 33x12.50R20 General Grabber AT2
Last edited by nfrazu; 06-05-2016 at 12:53 AM.
#429
I need the running boards for the wife, and I also have to haul the occasional customer around.
What do you mean by the 'valance' specifically? The bumper cover or the low hanging black wind deflector?
#430
Senior Member
iTrader: (1)
The two colormatched pieces that hang below the fog lights. IMO, with those removed the bodyline matches up and not only looks cleaner, it will make it look taller. As far as how to remove them, i want to say @Z7What removed his or knows how. Cant be more than a few bolts and maybe some clips. Removing or trimming the wind deflector wouldnt hurt either but thats up to you.