kchill93

That's a negative. All that the 2 inch spacer does is stack on top of your coil. Nothing to do with wheel poke

loadchris83

Since I have you here chill....what do you recommend for a 2in spacer? Does it change the ride at all?

kchill93

I had 1.5" Autospring spacer on my truck before switching to coilover setup with the Fox 2.0s; in my opinion the ride changes very minimally. For the price its worth the look. Over really large bumps you may notice some more bounce, but its really pretty much stock. I think if you went to a 2.5" and greater you would then start to notice a change in the ride quality

'10SuperScrew

My wife had a 2" pro comp level installed on my truck as an early fathers day present. The truck now sits roughly 1/2" higher now in the front. I'm looking at installing either a 1" or a 1 1/2" block in the rear to give it a slight rake. Question though. If I install the block do I need to eventually add the 4x4 rear shocks for the extra height in the rear or will it not matter?

RLXXI

4" RC lift/level.







.

kchill93

It won't matter from what I remember. Just add the block and you're good to go. No need to change out the rear shocks

kchill93

Just a pic off the beaten path

bigaaronf250

Lots of nice trucks in here.

'10SuperScrew

That's what I was hoping to hear. Now I need look at all the pics in the thread for the third time and try and decide whether to go with the 1" 1.25" or a 1.5" block

tclark

Your truck looks amazing! Where did you get the 4" RC lift? I checked out their site and all it show for a 2wd is a 2.5" kit.