Poor Man's Ambient Light Cup Holder Ring, Installed
#81
Senior Member
Thread Starter
If there's enough interest, I could begin building DIY kits for sale. I'm very close to having this setup perfected.
This was the basic plan with only change being the cup holder LED's being the optical tubing instead of a strip:
#82
kmaximus how did you add the cup holder lights to your current setup to be able to change the colors? Doesn't your current setup use mini USB connections to plug them in? I believe you are using the led glow kit if I read that correctly from your original post on lighting.
#83
Senior Member
Thread Starter
kmaximus how did you add the cup holder lights to your current setup to be able to change the colors? Doesn't your current setup use mini USB connections to plug them in? I believe you are using the led glow kit if I read that correctly from your original post on lighting.
I'm currently working on building my own RGB kit from scratch that will do the same job as the million mini but for the cup holder specifically use bulbs instead of the strip to create a better light distribution through the tubing and cuts down on clutter.
The following users liked this post:
flyinfry (05-10-2013)
#86
Senior Member
Thread Starter
Zman22, did you see the video I posted. I was using the RGB controller from my million mini kit....probably adding to the confusion is that my controller is still damaged so some of the colors don't show up correctly. That isn't an issue with the tubing or LED's being used...I just haven't bought a new controller
Last edited by kmaximus; 05-10-2013 at 06:56 PM. Reason: fixing my comment from iphone
#87
Oh, that RGB tubing didn't come with its own controller... I guess that's where I'm confused... I have the same million color kit as you do, except mine is the full one, not the mini
Last edited by ZMAM22; 05-10-2013 at 07:45 PM.
#88
F150 Forum
iTrader: (1)
for Eco_Punisher's setup it was similar to my own in that I used the 12v outlet in the center console. As Sharper4 mentioned, he tapped into the light for the shifter to function the same as rest of the interior truck lights. At this point, I haven't introduced any relay methodologies.
If there's enough interest, I could begin building DIY kits for sale. I'm very close to having this setup perfected.
This was the basic plan with only change being the cup holder LED's being the optical tubing instead of a strip:
If there's enough interest, I could begin building DIY kits for sale. I'm very close to having this setup perfected.
This was the basic plan with only change being the cup holder LED's being the optical tubing instead of a strip:
#89
Senior Member
Thread Starter
check post 83, it has the picture of the mini 3 light strip that fits quite nicely in the caverns of the center console
Also in that post, I mentioned I modified and created a frame that attached the tubing to the mini strip. To expand on that, I removed the clear casing drilled a few holes and fed the tubing so both ends rest on the SMD LEDs on the strip. Then strink wrapped to help direct light.
as I complete the tubing setup, I'm gonna move away from the LED Glow kit (since I can't add RGB bulbs to it) and build one that will be RGB, remote or switched and have some expansion for footwell lights.
#90
Senior Member
Thread Starter
btw, totally dig your Ipad setup that is some seriously awesome stuff.....