SPLACK

Ok I been on the verge of removing my 2.5 leveling kit because my of my upper control wearing out due to angle and it's my 3rd one since I've owned the truck in 2 years. So I wanna see pics of stock trucks with 33s on preferably stock wheels. 275/70/18 or 275/60/20 probably would be more common so send pics guys

dssbob

275/65/20's on stock wheels. No level. No Rub.

SPLACK

Really 275/65/20 fit with no level??? I have the same size but mud tires and they rub the front valence so I trimmed it. Can you send more pics so I can get a better look and what tires are you running?

IAJack

Falken Wildpeak AT3W's in 275/65/18's Stock size for my truck and no rub or issues.

dssbob

Really. No lift. No level. No Rub. Tires are Toyo AT2's. I'm sure if they were MT's the lugs would rub. I had 33 MT's on my '07 and had to trim. I can fit my whole hand between the tire and the UCA's and there is prob 1/4" (just eye balling) between the valence and tires at full lock. I'll take better pics later today when it warms up outside.

SPLACK

Do y'all think my truck will look right if I take my 2.5 level off? Here's what she look like now

dssbob

Hard to tell until you do it. I've a 2" level sitting in the garage that I was going to to put on after my tire install. But once the tires were on, I didn't think it needed it. Truck only has 15k miles on it, so once the front end settles I might throw the level on, but for now I 'm happy with it.

mpittmann

Not stock wheels but 33s. I'm also trying to decide if I should do a level or not. I only have 1.5" of rake so it's not that bad, but noticeable

GrasslandHVAC

Why not go to a 1.5 or 2 inch spacer or an after market uca with serviceable ball joint?

SPLACK

I use to have a 2" spacer and had no problem with anything but I went up to a 2.5 spacer and it makes a noise like something is rubbing when I hit potholes or railroad tracks at slow speeds. I thought about maybe trying the uni ball uca