Part number for folding tow mirrors!!!
05-26-2015, 10:25 AM
#11
Ha so I have heat and didn't even know it?! Oops! I never saw the little emblem on the mirror that indicates heat, I see he little fold symbol on them. So when does the heat come on or are they always on? I guess I am going to look at the A1 mirrors, so I want have to use that installation kit they send with them then?
PM 1A Auto and see, you probably do not need the kit, and might be able to save a couple of bucks. I would give them a shout just to make sure everything will work properly.
Yes, no heated icon on the mirrors, I thought i did not have heat either, until I hit the rear window defrost button and was surprised that the ice on the mirrors melted
Depends on where your controls are located, Here is where mine is at:
05-26-2015, 11:00 AM
#12
Yup that's where my rear defrost is, damn lol! Thanks for help souring falcon, I love the ford oem's cause turn signal is still on bottom of mirror facing me but I don't like that price hahaha
05-26-2015, 02:30 PM
#14
if anyone has any questions about our tow mirrors I can help you out
Tony
Tony
05-26-2015, 02:39 PM
#15
Ha so I have heat and didn't even know it?! Oops! I never saw the little emblem on the mirror that indicates heat, I see he little fold symbol on them. So when does the heat come on or are they always on? I guess I am going to look at the A1 mirrors, so I want have to use that installation kit they send with them then?
These tow mirrors do not have a puddle light. The side marker is wired to act like the puddle light did. The kit also comes with two pigtails so that you can plug them into the circuit that goes to the side marker. You'll be able to hard wire to to act like a clearance light or a turn signal, if you would like to.
Here's a link to them http://www.1aauto.com/2007-14-ford-f...ampaign=1ATony
Tony
05-26-2015, 09:51 PM
#16
If you have the power fold feature from the factory, with power and heat, these mirrors would be a direct replacement for you. You will be able to use the factory power fold switch.
These tow mirrors do not have a puddle light. The side marker is wired to act like the puddle light did. The kit also comes with two pigtails so that you can plug them into the circuit that goes to the side marker. You'll be able to hard wire to to act like a clearance light or a turn signal, if you would like to.
Here's a link to them http://www.1aauto.com/2007-14-ford-f...ampaign=1ATony
Tony
These tow mirrors do not have a puddle light. The side marker is wired to act like the puddle light did. The kit also comes with two pigtails so that you can plug them into the circuit that goes to the side marker. You'll be able to hard wire to to act like a clearance light or a turn signal, if you would like to.
Here's a link to them http://www.1aauto.com/2007-14-ford-f...ampaign=1ATony
Tony
So Tony even the Ford OEM ones don't have the puddle light on bottom or turn signal? I am really considering a set of yours!
05-26-2015, 09:55 PM
#17
I am guessing the OEM power fold don't have turn signal or puddle light from what I see. If you get OEM that don't power fold you get the turn signal below mirror and puddle lamp on bottom
05-26-2015, 09:59 PM
#18
So if you don't have power folding, will these give you power folding?
05-27-2015, 05:38 PM
#19
Senior Member
do a search on adding power folding mirrors and you find discussion on it. It's very easy from what I read. You get the power fold switch/ mirror adjustment and then you have to run a wire from the switch to each mirror and then the power fold will work. I'm planning this mod for my trk soon.