Foam looking thing under the cowl?
#1
2012 f150 screw fx4
Thread Starter
Foam looking thing under the cowl?
Hello. What is the foam under the hood, just by the arms that hinge to raise the hood, just under the cowling for the wipers. It looks to be attached by 1 plastic clip and it looks like a wind guard for the cowling or something. Had my windshield replaces and they crushed it putting the cowling back on. I want to replace a torn one and can't find a name or ford part number.
Thanks!!
Thanks!!
#2
Senior Member
It is the PCM (Powertrain Control Module) cover. It does not have a separate part # and is supplied with the PCM support bracket (service part # 12A692).
.
.
#3
2012 f150 screw fx4
Thread Starter
It's just foam. I tried to take a pic but it wouldn't upload.
Right below the plastic where the wipers are, there is a plastic front under the hood. On each end is foam about 4"x4" attached by a plastic push type connector. Looks like it stops air from flowing through the cowl from the sides from under the hood. The hinges for the hood are next to this piece on both sides.
Right below the plastic where the wipers are, there is a plastic front under the hood. On each end is foam about 4"x4" attached by a plastic push type connector. Looks like it stops air from flowing through the cowl from the sides from under the hood. The hinges for the hood are next to this piece on both sides.
#4
2012 f150 screw fx4
Thread Starter
#6
Senior Member
Michael7166 - I don't think so. Thanks for your response though.
And the parts list that I have doesn't show that part.
.