How to remove stock rear blocks. And is that a good idea ?
#1
Senior Member
Thread Starter
Join Date: Jun 2010
Location: Baltimore
Posts: 101
Likes: 0
Received 0 Likes
on
0 Posts
How to remove stock rear blocks. And is that a good idea ?
Is it a good idea to remove stock rear blocks instead of raising the front to level my look down. ?
#2
Senior Member
Yes.
#3
Easy. You'll need jack stands and a floor jack. jack up the back of truck, set the jack stands on the frame forward of the tires high enough to let the rear axle hang down ( best to remove wheels). Set the jack under one side of the axle, loosen the nuts, lower the jack until the spring separates from the axle, remove the block and reassemble ( you can reuse the rock hardware). Repeat on the other side. i've had mine off for about year with no issues