Electronic HVAC doesn't blow through floor vents
#1
Electronic HVAC doesn't blow through floor vents
Hello all, I have a 2012 Ecoboost XLT Scab. It has the regular Sync system and the electronic HVAC system (manual ***** for temperature/fan speed, electronic selector for floor/vent/defrost).
When the HVAC is on the FLOOR ONLY setting, it blows out weakly from the floor vents and mainly through the defrost vents. VENT+FLOOR and DEF+FLOOR are basically the same, hardly any air through the floor vents. Vent or defrost alone seem to be working as intended. It's not a problem when it's warm but it SUCKS when it's as cold as it is in Ohio right now, I get to work with cold toes every day.
What's the problem and how can I fix it? It seems like there is a door that is supposed to close off the defrost that's not closing? Anyone had issues like this before?
Thanks!
When the HVAC is on the FLOOR ONLY setting, it blows out weakly from the floor vents and mainly through the defrost vents. VENT+FLOOR and DEF+FLOOR are basically the same, hardly any air through the floor vents. Vent or defrost alone seem to be working as intended. It's not a problem when it's warm but it SUCKS when it's as cold as it is in Ohio right now, I get to work with cold toes every day.
What's the problem and how can I fix it? It seems like there is a door that is supposed to close off the defrost that's not closing? Anyone had issues like this before?
Thanks!
#2
... When the HVAC is on the FLOOR ONLY setting, it blows out weakly from the floor vents and mainly through the defrost vents. VENT+FLOOR and DEF+FLOOR are basically the same, hardly any air through the floor vents. Vent or defrost alone seem to be working as intended. ...
My associate Crystal may be able to assist you with that. You can PM her directly here: https://www.f150forum.com/private.php?do=newpm&u=47652
Antonio
#3
Hi Slide,
My associate Crystal may be able to assist you with that. You can PM her directly here: https://www.f150forum.com/private.php?do=newpm&u=47652
Antonio
My associate Crystal may be able to assist you with that. You can PM her directly here: https://www.f150forum.com/private.php?do=newpm&u=47652
Antonio
#4
This is how to change temperature door motor. Yours need the other one but gives you an idea what you could be in for.
#6
Five-0 Ret.
I would certainly be very sad if mine does this after the warranty is up.
To be fair though, the guys in the video was an EcoBoost. That could have been the start of the problem right there.
To be fair though, the guys in the video was an EcoBoost. That could have been the start of the problem right there.
Last edited by Wanted33; 01-30-2014 at 03:08 PM.
Trending Topics
#9
It really isn't that bad to do.
With yours you should be able to change the motor without removing the dash but it may also be a broken or stuck door.
Mine failed obviously because its an ecoboost
I have 82000kms and even tho the truck is only 2 and a bit years old my warranty is up
With yours you should be able to change the motor without removing the dash but it may also be a broken or stuck door.
Mine failed obviously because its an ecoboost
I have 82000kms and even tho the truck is only 2 and a bit years old my warranty is up