New Morimoto XB LED fog lights
The following users liked this post:
RaptoRx7 (11-27-2015)
#372
Yes, they changed arm sides on the foglight. There is the adjuster arm that comes off the back of light. They changed the arm location so n the 10' drivers bucket the am is on the wrong side.
You need a 2011 and up drivers side bucket for it to be a PnP situation, if you're crafty you can modify the 10' drivers side bucket to accept the new LEDs lights.
I found a 2011 locally for cheap so I did the swap.
You need a 2011 and up drivers side bucket for it to be a PnP situation, if you're crafty you can modify the 10' drivers side bucket to accept the new LEDs lights.
I found a 2011 locally for cheap so I did the swap.
The following users liked this post:
RES4CUE (11-28-2015)
#373
Senior Member
iTrader: (3)
The Osram and Phillips high quality hid bulbs. There are Ultinons and CBI's. Supposedly, more output, better light. The one thing with the LED fogs is that they produce a true 6k light. Call me crazy, but the XB35 bulbs (Moriomoto brand) at 5500k don't quite match and I'd like a bit more of a match as well as output with the higher quality bulb
#374
12v_dub,
My congratulations! It's very cool choice! I bought it about three mouth ago on ebay. And I have never regretted my purchase. This product was delivered to me directly from Japan. In addition to its functionality, this looks cool! So I want to know what can you say about the experience of using this amazing thing?
My congratulations! It's very cool choice! I bought it about three mouth ago on ebay. And I have never regretted my purchase. This product was delivered to me directly from Japan. In addition to its functionality, this looks cool! So I want to know what can you say about the experience of using this amazing thing?
Last edited by Zunos; 11-28-2015 at 05:49 AM.
#376
Use promo code XBFBFord
#378
For sure!
#380
It's easy. Literally 20 min or less per side. Unbolt housing from bumper, pull assembly, swap in LED units, adjust to where OEM are adjusted to (by sight just measuring adjustment screw), bolt back in and plug in.
Joe
Joe