cmbezln

yeah i dont think ive ever seen one here in chicago....then again 99.9999% of trucks here are stock, aside from a line-x sticker in the rear window.

Spiky

I've seen 3 in the last week. Of course, they also said "Raptor" right on the tailgate.

AutoAnything

Man, you really do change wheels often don't you!

I will say though, we just started carrying Black Rhino wheels, and the Madness are by far my favorite. I love seeing new, unique wheel designs!

Mike94ZLT1

What offset are the stock 20" 6 spoke wheels? I'm interested in a set of these, hoping they stick out a little bit more than stock.

AutoAnything

The Black Rhino Madness are 12mm offset for the 20". For reference, most of this generation's stock wheels seem to be 34-44mm offset depending on the trim. EDIT: Apparently only the Raptor has 34mm offset wheels, the rest are 44mm. Thanks Spiky!

If you have any more questions or would like a quote, feel free to shoot me a PM.

Mike94ZLT1

Pardon my ignorance but does that mean the Madness wheels will stick out about an inch further than stock?

Spiky

Ford's wheels are all 44 offset except Raptor at 34. Unless 2017 brought something new.

AutoAnything

It's tricky to say since the width of the wheel also needs to be taken into account. From what I can tell, most 09-14's came with 7.5" wide wheels, and these Black Rhino's are 9" wide, so you need to take the offset difference of about 1.25" out versus the stock 44mm offset wheels as well as the added width.

I would say to be safe that these would widen the truck's end stance by as much as 2", but this would be something you will want to measure for yourself before making a decision.

Anyway, apologies for hijacking the thread! Please feel free to PM me if anyone has other questions.

discodave

Here's a shot that shows the cutoff on these projectors. Very clean and super wide.

WHITE TRITON

If you haven't already when adjusting the crooked bezel try putting a bead of epoxy around the shroud before pushing the projector lense into it. That's assuming yours has the centric rings like mine. That should hold them in place. I was running the same shroud but with the h1 7.0 projector.