New goodies for my 09 F150
#1
Junior Member
Thread Starter
Join Date: Oct 2008
Location: orange county
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
New goodies for my 09 F150
I just picked up a new 09 F150 this weekend. Found out that aFe makes a catback system for it. The tailpipe is a 3.5" dia. Looks pretty beafy. Gonna install it tommorow. Ill give you guys some input. The exhaust even came with a free replacement air filter. Pretty cool. I wasnt expecting that.
http://www.afefilters.com/productrev...15/4943015.htm
http://www.afefilters.com/productrev...15/4943015.htm
#3
Senior Member
if its just the tip thats 3.5 and the rest is smaller its fine. Im runnin a single cat back system at 3" and thats optimal for single pipe from cat back on these trucks
#4
Moderator (Ret.)
I'll agree that 3.5 inches is too big for a 5.4 liter unless the engine is gulping masses of incoming air due to head work modifications. Too large of an exhaust will actually hinder performance rather than improve it. Here's an example where "bigger is not better".
If the tip only is 3.5 inches, then that would be fine.
If the tip only is 3.5 inches, then that would be fine.
#6
Notorious Thread Editor
Yeah..I hope that is just the tip diameter too. I have split 3''s to 3.5" tips and it seems I am very close to it's limit.
The 09's are nice...I just can't get around the grill..
The 09's are nice...I just can't get around the grill..
Last edited by SinCityFX4; 10-31-2008 at 11:09 AM.
#7
Junior Member
Thread Starter
Join Date: Oct 2008
Location: orange county
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
exhaust
The system is 3" to the tailpipe. Then the tailpipe is reduced from 3.5" to 3" to slip into the muffler. I noticed an increase in power right from the start. Ill try and get some pics up of the truck. The cab is longer by 6". Very noticable over my friends 08 truck.
Trending Topics
#8
Moderator (Ret.)
I want to remove and replace the stock muffler; not nessesarily for better performance or sound, but rather to remove some weight. Holy cow, that is one large muffler. I could cut it open length wise and use it as a casket.