FoRdMaN09

I have a 2009 F150
Just looking for some specs (stock muffler length)
Pipe sizes etc
Truck is gone for a few days so I cannot just go out and measure
Would like to order a muffler online today but I also need to know the stock length so I can order some pipe to make up for shorter muffler.....
What do you guys have on your F150's for mufflers...
Any clips etc would be awesome! Would like to compare....
Thanks in advance!

dejong1

I have stock exhaust but YouTube has a lot of videos

shortride

iTrader: (1)

I would think after market muffler and tail-pipe retailers would have that information.

FoRdMaN09

Just called a place and they said they were not 100% sure but they thought it was offset offset same side and 2.5" pipe
I am going with an 11" body Magnaflow Muffler and I am going to pick up 24" of extra pipe for install to be safe so I have enough...

FoRdMaN09

Can anyone confirm?

Platinum_Sean

Not sure the lengths required, but by a few pipes, make sure you can return uncut pieces.

I went with a Boral kit- catback, muffler, dual rolled tips. Most manufacturers will have exact lengths for what you ask for. Muffler shops will cut as required.

Vid:

Mgizler

I just put a flowmaster 2.5" center in center out. I cut out the stock and welded in some 2.5" extensions. Just cut everything to fit and put it all together.

Koolponycar

My truck is a 2010. I believe the stock pipe is 23/4 or 2/78. I went with a flow master 40 series original single 3" in dual out 2.5". Go to general discussions,look for New Exhaust 2010 tell me what you think. I have two clips posted exterior and inside cab.

Army_Monkey

I just went out and measured the stock exhaust from my '10, and it's 2 3/4" OD on both sides of the muffler. The muffler itself is 31" end to end, offset inlet/outlet with the in/out on the same side.

FoRdMaN09

Thanks guys!
This one would work then I guess?
Should I go 11" or 14" body

http://www.hottexhaust.com/detail.asp?PRODUCT_ID=14376

http://www.hottexhaust.com/detail.asp?PRODUCT_ID=14377