Need advice for factory subwoofer replacement!
The following users liked this post:
Slammed0 (02-17-2020)
#14
Originally Posted by wasinger3000
Yea I was surprised by the factory lint block inside lol. But I just put two tens in and it is perfect.
#15
Promoted to Elitist Prick
Thread Starter
Originally Posted by zacharyz
Where did you get your box from? And what subs are you running?
#16
#17
Promoted to Elitist Prick
Thread Starter
But for $100 More you can get two tens,high quality amp and a box. Or even around $250 for one amp one sub and one box. lets face it guys this fake little subwoofer that belongs under a computer desk is not going to cut it for most people that like quality bass.
#18
Originally Posted by wasinger3000
But for $100 More you can get two tens,high quality amp and a box. Or even around $250 for one amp one sub and one box. lets face it guys this fake little subwoofer that belongs under a computer desk is not going to cut it for most people that like quality bass.
#19
Promoted to Elitist Prick
Thread Starter
Alright well i installed all the stuff yesterday and i really like the set up so far. But it is still not as loud as my one W6 12" that was ported. Then again no matter how many subs you put in a seal box it will never be as loud as a ported box. I dont know what subs you have had in a truck before but these two tens are very very very clean sounding, they hit hard and deep. I would really go for these kickers if you need a sub. Now as for the line level, this was what i spend the most time looking into. What i found out to be the best and trouble free way to get your line level input along with your remote turn you is to use the Kenwood KAC-9105D because all you have to do is wire in one door speaker and it will turn the amp on and be the line level input. This seemed to be the only way to have a clean install without buying different converters and losing your bass when you turn the volume up. Now for the bass and treble control, i think the factory nav controls are just fine for controlling the amp. But some people might want more control.
I found the best place to put the amp out of sight is behind the rear passenger side seat. It is a perfect place for an amp that no one will ever see.
The amp = http://www.sonicelectronix.com/item_...KAC-9105D.html
The Subs = http://www.sonicelectronix.com/item_...-10CVT102.html
I found the best place to put the amp out of sight is behind the rear passenger side seat. It is a perfect place for an amp that no one will ever see.
The amp = http://www.sonicelectronix.com/item_...KAC-9105D.html
The Subs = http://www.sonicelectronix.com/item_...-10CVT102.html
The following users liked this post:
Jason Bourgeois (06-25-2019)