My Ambient Lighting install 2.0
#11
Senior Member
Thread Starter
You mentioned mounting the module in the glovebox. In the first pic you posted it looks like a pic of the console and not the glovebox. Can you elaborate a little on this? Are my old eyes interpreting the picture wrong or is there another pic that goes along with the install?
Buck
Buck
#12
Senior Member
#13
Senior Member
Thread Starter
Grandpa's Grocery Getter, thanks and your's looks great.....I really like the lights glowing from under the dash....I was lazy with my install and kept it all centered around the center console and chairs.
I have a single 12v led I'm gonna use for the center console, I just need to tap in to my lame wiring
I have a single 12v led I'm gonna use for the center console, I just need to tap in to my lame wiring
The following users liked this post:
Grandpa's Grocery Getter (11-22-2012)
#14
Senior Member
Grandpa's Grocery Getter, thanks and your's looks great.....I really like the lights glowing from under the dash....I was lazy with my install and kept it all centered around the center console and chairs.
I have a single 12v led I'm gonna use for the center console, I just need to tap in to my lame wiring
I have a single 12v led I'm gonna use for the center console, I just need to tap in to my lame wiring
Mine actually look bettter then the pics i have, I need to take some proper one's, and I love my Blue luminated plasma glow stainless switch
it sets it off
Happy Turkey Day!!
Cheers
#15
One Clean Machine
iTrader: (5)
Kmaximus, Your Lighting looks really good !!!
I used Plasma Glow.....but I wanted only blue, I was going to get the remote set up from neon lights but they wouldn't ship to canada...
I still have to add my last light to the inside of my console yet...
here is a few pics of mine
Attachment 165453
Attachment 165454
Attachment 165455
Attachment 165456
Attachment 165457
Attachment 165458
I used Plasma Glow.....but I wanted only blue, I was going to get the remote set up from neon lights but they wouldn't ship to canada...
I still have to add my last light to the inside of my console yet...
here is a few pics of mine
Attachment 165453
Attachment 165454
Attachment 165455
Attachment 165456
Attachment 165457
Attachment 165458
Hey Grandpa, I'm getting ready to install this feature in my console cupholders and front footwells, where did you tap into your wiring for power? Also did you wire them to come on with headlights/parking lights, or is that a on/off switch for them in your 3rd picture? Thanks for any reply!!!
#16
Senior Member
Hey Grandpa, I'm getting ready to install this feature in my console cupholders and front footwells, where did you tap into your wiring for power? Also did you wire them to come on with headlights/parking lights, or is that a on/off switch for them in your 3rd picture? Thanks for any reply!!!
I tied Into the power seat, then ran everything off that as its central, and that its a constitnt power source.
I beleive I found power at the left kick plate, by the E-brake, that cover just pops off like the door sills
I used speaker wire to run all my long leads, for the door sills and carpet...
I used a Blue Plasma Glow stainless push switch, 3rd & 5th Pic, I bought everything from CARiD
mine came with 10 blocks with 3 led in each block.
I still have to do the inside of the console I have 1 block left to do that...
Under the rear seat i took a length of aluminum angle iron ran it the length of the seat, drilled a hole in the center used a small lag bolt, and attached to the tool box cover, and i made connections to unplug it case I wanted to remove it with1 bolt - I still have to paint the aluminum black.....was in a hurry to get it done..lol
good Luck!
silver push switch is for the blue ambient lighting, red is for my Front Rigid floods
Last edited by Grandpa's Grocery Getter; 11-23-2012 at 05:32 AM.
#17
One Clean Machine
iTrader: (5)
Hi everyone I need a little wiring help for my ambient lighting I'm ready to install! I bought two strip LEDs one for each foot well and one single LED to light up my cupholders along with a pushbutton switch that lights up like grandpas and a dimmer switch to control how bright or dim LEDs are. Each LED has two wires coming off of it a red and black, the pus button switch has 5 prongs a positive, a negative, a common, a No, and a nc. The dimmer has only positive and negative! I only want the blue circle on the switch to light up when I turn the leds off, but I have no idea how to wire this setup. I bought everything from superbrightleds.com. I need someone to tell me how to wire this all up! Please Help!!!
#18
One Clean Machine
iTrader: (5)
#19
One Clean Machine
iTrader: (5)
Anyone??? Please!!!