Multi-function display reprogramming
#1
Multi-function display reprogramming
Hi,
I've installed an OEM backup camera and park assist system in my F150 2012 supercrew using all the correct wiring from Ford. But the dealer can't seem to re-flash it to add the functions under the driver assist menu in the multi-function display in the dash. I was told those options are build specific and tied to the VIN so there aren't any options to include the camera and park assist in a rebuild of the menu for my particular truck.
Has anyone figured out how to work around the VIN number limitations for the as built configuration if that is possible?
Thanks!
I've installed an OEM backup camera and park assist system in my F150 2012 supercrew using all the correct wiring from Ford. But the dealer can't seem to re-flash it to add the functions under the driver assist menu in the multi-function display in the dash. I was told those options are build specific and tied to the VIN so there aren't any options to include the camera and park assist in a rebuild of the menu for my particular truck.
Has anyone figured out how to work around the VIN number limitations for the as built configuration if that is possible?
Thanks!
#2
Senior Member
iTrader: (5)
Hi,
I've installed an OEM backup camera and park assist system in my F150 2012 supercrew using all the correct wiring from Ford. But the dealer can't seem to re-flash it to add the functions under the driver assist menu in the multi-function display in the dash. I was told those options are build specific and tied to the VIN so there aren't any options to include the camera and park assist in a rebuild of the menu for my particular truck.
Has anyone figured out how to work around the VIN number limitations for the as built configuration if that is possible?
Thanks!
I've installed an OEM backup camera and park assist system in my F150 2012 supercrew using all the correct wiring from Ford. But the dealer can't seem to re-flash it to add the functions under the driver assist menu in the multi-function display in the dash. I was told those options are build specific and tied to the VIN so there aren't any options to include the camera and park assist in a rebuild of the menu for my particular truck.
Has anyone figured out how to work around the VIN number limitations for the as built configuration if that is possible?
Thanks!
#3
No, the dealer was going to check but never did call me back. I'm not sure I want them programming it if they aren't up on the changes since it might screw up something else. It would be nice to adjust the camera zoom and turn the backup sensors off when using our boat but it's been more useful than annoying.
#4
F-150 Enthusiast
iTrader: (2)
I'm pretty sure the only way to go about doing this is purchasing a new gauge cluster that has not been used before and find a VIN# that has all the correct builds for the options that you have and have it programmed. I dont think they can be re-programmed after a VIN# has been associated with one.
-Mark
-Mark
#5
Senior Member
iTrader: (5)
No, the dealer was going to check but never did call me back. I'm not sure I want them programming it if they aren't up on the changes since it might screw up something else. It would be nice to adjust the camera zoom and turn the backup sensors off when using our boat but it's been more useful than annoying.
#6
Senior Member
iTrader: (5)
I'm pretty sure the only way to go about doing this is purchasing a new gauge cluster that has not been used before and find a VIN# that has all the correct builds for the options that you have and have it programmed. I dont think they can be re-programmed after a VIN# has been associated with one.
-Mark
-Mark
Trending Topics
#8
But as you say it does work fine and I've added the Nav system from the F250 so all's good!