godfather_1979

I have a 2013 that I want to find a descent seat cover that fit good, or find some other seats.

Thanks nick

white08gt

Clazzio seat covers, contact Spencer. do a search and you will see many on here that have them.

MustangAndy

Full seat wise yes. If someone is parting a truck out or if you go to a pick-and-pull there should be no issue. Some guys like to swap fronts to get that full center console. I recently changed my center jump seat out. 4 bolts from the side. Didn't take very long.

texas_superman

I know the center console swap has been beat to death, but I assume, will a xlt jump seat swap with a XL jump seat? looking to get the top works of the xlt jump with storage and cup holders....???

ParkrerBickel

The only reason I can thing that it won't would be the cup holders and everything in the back. I saw your post away the single cab, and I'm not sure how much space is behind the seats but the XLT jump seat from the Super Crews have a back side with cup holders and everything on them.

texas_superman

hmm.... I didn’t realize the xlt had an attachment to it. I suppose if I had to, I could just chop it off. Being single cab, wouldn’t be able to see if it looked bad or not.
thank you for the input. Surly the bracket would be the same though ?

Wanna Ride

In the ‘09-‘14 era, I’ve swapped many sets of seats and consoles from one truck to another, with no real issues. But all of those have been from trucks with the same cab configuration. I haven’t done any seat swaps, crossing cab-configurations. I would think they’d be fairly similar, with minor differences, but I can’t say 100% for certain.

jess1

XLT jump seat takes up the same space. It's a bolt in swap. The storage/cupholders are on the back of the seat itself. Fold it down and *presto*
You can't put the XLT "console" (no seat) in a single cab (so I've been told...)

texas_superman

that’s exactly what I needed to confirm. Now I’ll be on a serious hunt for the xlt center jump. Thank you!

Mint13

Not all are completely interchangeable. You have to be careful with the passenger seat especially, 09-11 have a slightly different OCS system, using 4 sensors to figure out the weight. The 12-14 have only two. So you can’t just plug and play that it’ll throw an airbag light and cause you a big headache. I swapped the seat base from my old passenger seat to my new one though. Was a real PITA but allowed me to get it working again. Have to do the OCS zero weight reset though in order for it to function as intended. The entire point of the system is to turn the passenger airbag on and off depending on the weight of the passenger