License Plate relocation
#1
Junior Member
Thread Starter
Join Date: Sep 2015
Location: Plymouth, Ma
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
License Plate relocation
i have a 2013 5.0 and looking to see what kit I need to order to offset my license plate like the eco boost so I can put a light bar in there
The following users liked this post:
michaellake (09-13-2015)
#5
I've got one from a 2014 ECO it came off a dealer take off bumper it looks new if your's is in excellent condition I'd be willing to trade....
#7
Senior Member
So this may be a dumb question, but I'm not sure how to remove the panel on the driver side to replace it with the plate holder. I don't want to do anything stupid and wreck my bumper. Any input?
Trending Topics
#8
Senior Member
Squeeze clips on back...
#9
Senior Member
I wish I knew that when I traded in my 2011 EcoBoost! I was at the dealership after dark and wanted to swap the whole thing with the bread loaf from the 5.0 I was picking up.
Had I known it was just a few pressure clips, I would have crawled under and made the trade.
Had I known it was just a few pressure clips, I would have crawled under and made the trade.
#10
Front License Plate Bracket On Ecoboost Truck Bumper
How do you remove the offset License Plate Bracket to Replace with the "bread loaf" cover? Ther are no screws/bolts to remove it from the front side.
When I look under the truck, it looks like the bumper assembly is enclosed and the bumper needs to come off to get to the license plate bracket from the backside of the bumper.
Dave
When I look under the truck, it looks like the bumper assembly is enclosed and the bumper needs to come off to get to the license plate bracket from the backside of the bumper.
Dave