Leveling kit with winch or heavy bumper
#1
Member
Thread Starter
Leveling kit with winch or heavy bumper
Have a 2.5" AS leveling kit on my 2010 Screw with a hidden winch behind factory bumper. My front end still sits lower than back because of the extra weight. My question is I know a 3" level is not a good idea due to angles of the front end parts etc. Does anyone have any experience with a heavy bumper or winch up front with a leveling kit? I'm wondering if a 3" would be ok if it is going to settle to a 2 1/2 because of the extra weight?
#5
Senior Member
iTrader: (1)
The only way to properly account for the additional weight is to swap to a spring with a higher rating. Stock spring are rated around 480lbs or so. Fox and [MENTION=156426]F150Lifts.com[/MENTION]use Eibach springs rated in the 650 and 700lbs range respectively. There's a user in the BOSS thread that stated his plow would sag the truck up to and over a full inch but with the new BOSS coilovers he only sagged about 3/8".
The following users liked this post:
Treekiller73 (03-07-2015)