Leveling Kit Help Houston,TX
#1
2010 F150 XLT 4x4
Thread Starter
Leveling Kit Help Houston,TX
I'm looking for a little advice in the right direction here... I want to level my 2010 F150 XLT, and I'm not sure if I need to go with the 2" or 2.5" kit. I've been looking at the Rough Country kit (2.5") and it seems like a decent option. Any advice? I'm also trying to find a decent shop around the Houston area to get it installed, any help would be greatly appreciated!
Last edited by DAVESM1TH; 09-15-2014 at 05:18 PM.
#2
I'm looking for a little advice in the right direction here... I want to level my 2010 F150 XLT, and I'm not sure if I need to go with the 2" or 2.5" kit. I've been looking at the Rough Country kit (2.5") and it seems like a decent option. Any advice? I'm also trying to find a decent shop around the Houston area to get it installed, any help would be greatly appreciated!
#3
Senior Member
stick with no higher than 2". AutoSpring makes a 2" with an offset so the spring want hit on uca. around $90 shipped on ebay. you can get powder coated or just painted black. all steel, one of the most popular level kits on this forum.
#4
<b>F150 Forum</b>
Want the best call us!
#5
2010 F150 XLT 4x4
Thread Starter
I've looked into a few different places, and I found Offroad Outlaws in Katy. They will do a 2" leveling plus alignment for $400. I really need to try and find someone who has had work done there and hear what they have to say.
#6
Senior Member
there is another shop in Sugarland. All out off-road. They do quality work. Btw, a few members and myself are planning a meet and greet on October 18th if you wanna ride by. We've talked about a few locations, and I think we've settled on the hooters of hwy 290.
The following users liked this post:
DAVESM1TH (09-16-2014)
#7
2010 F150 XLT 4x4
Thread Starter
Thanks for the info! I'll keep the meet and greet in mind. Maybe you can shoot me a PM detailing the everything if location or date changes.
Trending Topics
#8
Senior Member
#10
F150 Greenhorn
Holy **** that's expensive! I'm in Iowa and paid $50 to have it installed and $60 for the alignment. I also wouldn't go any higher than 2".