Stumpy

On the UCA?

levirooskie

Nope no rubbing so far, I've flexed it a few times and had no problems! I don't get offroad weekly as I don't have time... But at least once every couple of weeks I like to get it dirty so I have an excuse to clean it. But for everyday stuff its great to, looks way better than stock!! Also the 6 or 8 times I've been off the beaten path it has done really well. It comes very close at full lock with articulation of the truck but still clears! This being said, I've mostly been in the mud, some deep ruts, and smallish rocks (stupid running boards) with no problems. But nothing crazy...

Stumpy

Do you think with 1/4" spacers you would clear more or rub somewhere else?

zotesf150

this is a 2010 xlt chrome package 4X2

ABS front leveling kit 2.5 inches and a 3 inch rear block
tires are 33x12.50x20 federals

love it

(best picture i have so far)

levirooskie

I'm not 100% sure, but I do know that if it pushed the wheel "out" or away from the UCA that it may contact the front bumper at full lock... Well if not the bumper, the plastic spoiler/air dam that comes off the bottom of the bumper. Depending on if you use stock or aftermarket shocks, wheels, and tires...

Johnny Canuck

Toyo Mt 275/65/20
Daystar 2" level
No Rubbing at full lock.
Just had them put on so have not had a chance to take it off road yet.

TexasTexas95

Here she is clean. I forgot what size tires they are but they are BFG's wrapped in chrome clad 2.5 inch level.


Here she is yesterday....Got a little dirty hunting...

snosleder080

anyone with 295/55/20s? 305/55/20s?

Vermcub23

2.5" rough country w/ 295/60R20 nitto trail grapplers.

snosleder080

Anyone know what the width of these factory clad 20s is? I haven't had a tire off a rim yet to see. I'm looking at putting 295/55/20 or even 305/55/20 with 1/4 spacers but I'm not sure if rim can handle a 12-12.5 inch tire.

Please post any examples of this if you got em...or any of your tire combos with these rims its cool to see how the different combos look