When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I really want to put these two trucks side by side for a photoshoot, two very similar concepts done in two very different ways.
That would be awesome! What's crazy is that we both made these "almost same" modifications without "inspiration" from the other. Our brains were in sync!
That would be awesome! What's crazy is that we both made these "almost same" modifications without "inspiration" from the other. Our brains were in sync!
Yup, down to the light bar in the bumper and cubes in the fogs, and 35x12.50R17's, I'm even considering the Bushwhacker Extend-a-flares. All of it so close but still unique, and my first time seeing your truck was only a week or two ago.
Originally Posted by arokcrwlr
goneFX, I can see that your Raptoid hood cap is dimpled just like mine. I love the Raptoid grille, but the dimples are driving me insane!
We learned the trick, don't smack down on the cap when installing the clips, if you just gently press, it will get you in solidly enough, if you smack, you end up with dimples since you've gone too far. I noticed it, but I'm over it.
just had my front bosscoilovers and rear boss shocks installed, 1.5 level in front and rear at stock block,and i have just .50 rake left in front about what i was looking for, tires are coming soon will be going with bf goodrich all terrain T/A ko2 275/55r20,thought about doing 65 but will stick with the 55's, i think it will still look good.
I'm really diggin the stock fender flares you put on! How did you do it? Did you drill the holes or did you clip off the tabs and do something else? Are they holding up well?
Thanks in advance for any info!
I'm really diggin the stock fender flares you put on! How did you do it? Did you drill the holes or did you clip off the tabs and do something else? Are they holding up well?
Thanks in advance for any info!
thanks, i had a template to work with drilled the holes and applied paint to holes and applied valugard rust inhibitor on the drilled hole area, they are holding up nice and i think they look good i get lots of compliments.
07-01-2015, 07:09 AM
