Lets see those Leveled out f150s!!!!
#4342
What are the main reasons for installing the UCA's? Is it to get a better angle when lifting it up? I did Bilsteins at top height and the angle is steep; just wondering if it's worth adding UCA's at this point since I've had the level for a year now.
#4343
Kickin it
UCAs help the geometry of your suspension. Not necessarily a huge need with just a level, but when you get to the uppers of over 6" of lift, its a pretty good idea.
#4344
hallenfe
The main reason I got them is cause the leveling actually puts your ball joints at terrible angles. Lift kits are fine with stock ball joints cause there are new spindles and subframe drop brackets. I got a hell of a deal on them that's the only reason I got them.
The following users liked this post:
14silverxlt (12-21-2014)
#4347
So I took off my 2" and put a 2 1/2" after I added the aal and removed the block still looked stock in my oponion. It's a little better now. Plus I added a few add-ons under the hood and a raptor exhaust
The following users liked this post:
BDA3 (01-09-2018)