Lets see those Leveled out f150s!!!!
#3852
Junior Member
Join Date: May 2014
Location: Ontario, Canada
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
Here is my setup so far. The rear will be getting the 1.5" lift next week. BTW there is a 300 lb payload in the rear and the truck is perfectly level. The front sits 1/4" lower than the front with no load.
Rough Country 2.5" front
275/65R20 Nitto Terra Grapplers
Ruffino Traxx 20"x9" +15mm offset Ruffino Traxx wheels
Zero rub with no trimming. Very happy so far.
Rough Country 2.5" front
275/65R20 Nitto Terra Grapplers
Ruffino Traxx 20"x9" +15mm offset Ruffino Traxx wheels
Zero rub with no trimming. Very happy so far.
Last edited by CanFX45.0; 08-17-2014 at 08:23 AM.
#3854
It wasnt bad. I removed the whole grille from the truck. Then the black plastic from the painted grille shell. Put it on a saw horse and went to town with my reciprocating saw. I was nervous at first but once I got the new grille in I realized there is no way for anyone to see if its less than perfect cuts. Toughest part was getting the new one in and lined up to screw it to the original outside edges. Would recommend having a buddy help you do this part. It would have been a lot easier than doing it myself.
The following users liked this post:
wrknhonks (08-24-2014)
#3856
Which gears
Here is mine a 2012 5.0 XLT SCREW 4X4 with a 2.5" rough country leveling kit. Tires are 295/65/20 (35") Nitto trail grapplers with the stock 20" rims. Love the way it turned out.
Attachment 239662
Attachment 239663
Attachment 239664
Attachment 239662
Attachment 239663
Attachment 239664
The following 2 users liked this post by goosh:
fueler11 (08-22-2014),
Jeffrey Nelson (08-21-2014)
#3859
Senior Member
Treekiller IMO I wouldn't go above 33". My 07 has the 3.55 and 33's and is a slug. I can't even imagine 35's on that one let alone with a 3.31. I'm getting ready to do my 14 with 35's but that has the 3.73 and 5.0.