Let's See Aftermarket Wheels on Your F150s
#551
Member
#552
F150 Forum
#553
Unique & Different
My turn again to show off my new wheels...the first time it was Black Rhino Zambia wheels and now it's Black Iron's "Rebel" Wheel in Black Chrome PVD finish. 20x9, 87.1 bore, +18 offset. I had them mounted Cooper Zeon LTZ 275-60/20's.
...and a couple of pics to show how a +18 offset looks mounted:
...and a couple of pics to show how a +18 offset looks mounted:
I LIKE. I LIKE.
#554
F150 Forum
Thanxs ComQuest. It's tough trying to choose wheels that look good as well as ones that everyone else doesn't have. Seeing these wheels are made exclusively for the Canadian market, I'm sure I won't see many around on other F150 trucks.
I was a little concerned about the +18 offset putting the wheels and tires out too far, seeing that +44 is stock, and the Zambia wheels were +30...and in the end, the +18 positions them perfectly how I wanted. They are pretty much exactly flush with rear fenders and slightly past on the front since the front end of the truck narrows compared to the rear. I'm a very happy camper!
I was a little concerned about the +18 offset putting the wheels and tires out too far, seeing that +44 is stock, and the Zambia wheels were +30...and in the end, the +18 positions them perfectly how I wanted. They are pretty much exactly flush with rear fenders and slightly past on the front since the front end of the truck narrows compared to the rear. I'm a very happy camper!
#557
#558
Senior Member
+1 offset had been done by another person with the same set up with no problems and I knew some that had issues with +20 rubbing on the inside of the tire. I could have left the plastic on the front bumper alone, but occasionally it would rub while backing depending on the terrain and how much steer I put in it.