mpd2l17

Hello all I was installing led lights under my running boards(never did work) and I broke the clips to the plastic sil that runs from the front to the back.Any one know the part # I can't find it anywhere. I have a picture of the label under it.

Thanks for any help!

Robert Weller

Ok.. read and read... and double checked by popping off my dome light to see wires there.. I have a 2014 F150 STX... Have the yellow/black, Grey/Purple and the Yellow/Green wires up there..

Checked out the amp-research for it, but didn't have per say what the wires were for it.. It had just red to red and black to black..

One post on here I read someone just used the straight purple wire, but not sure if that would work for only on when doors open/unlocked

swooke1181

Has any one confirmed which wires in the door sills an be used to tap in to the dome light for 2015 + models?

2009
Driver Front - Gray/Violet is hot. Black/Violet is ground.
Driver Rear - Gray/Violet is hot. Black/Violet is ground.
Passenger Front - White is hot. Black/Yellow is ground.
Passenger Rear - White is hot. Black/Yellow is ground.
*credit to murderisthegame

2010
Driver Front - Gray/Violet is hot. Black/Violet is ground.
Driver Rear - Unknown
Passenger Front - Solid purple is hot. Black/Yellow is ground.
Passenger Rear - Unknown
*credit to twoodrough. He spliced the rear doors directly into the connections at the front

2011
Driver Front - Small solid purple is hot. Small solid black is ground.
Driver Rear - Unknown
Passenger Front - Solid purple is hot. Black/Yellow is ground.
Passenger Rear - Unknown
*credit to eyeflyone2. He did not mention the rear color combo.

2012
Driver Front - Solid purple is hot. Solid black is ground.
Driver Rear - Solid purple is hot. Black/Yellow is ground.
Passenger Front - Solid purple is hot. Black/Yellow is ground.
Passenger Rear - Solid purple is hot. Black/Yellow is ground.
*credit to gwanner.

2013
Driver Front - Thin yellow/green is hot. Thin solid black is ground.
Driver Rear - Thin yellow/green is hot. Thin black/yellow is ground.
Passenger Front - Thin yellow/green is hot. Thin black/yellow is ground.
Passenger Rear - Thin solid purple is hot. Thin black/yellow is ground.
*credit to bigmyke23

freddyttt

bump for later-

Odjoe

tagged for great info

2016 FX4x4

2016 wire colors? Trying to install puddle lights and need the trigger wire colors. Thank you in advance.

Splinterman

Anyone know the correct wire colors on a 2015 SCREW under the sill plate? I'm adding the sill lights and want the correct wires for the dome light circuit.

Thanks!

travr6

Quote:

2011
Driver Front - Small solid purple is hot. Small solid black is ground.
Driver Rear - Unknown
Passenger Front - Solid purple is hot. Black/Yellow is ground.
Passenger Rear - Unknown
*credit to eyeflyone2. He did not mention the rear color combo.

2012
Driver Front - Solid purple is hot. Solid black is ground.
Driver Rear - Solid purple is hot. Black/Yellow is ground.
Passenger Front - Solid purple is hot. Black/Yellow is ground.
Passenger Rear - Solid purple is hot. Black/Yellow is ground.

My truck is a 2012 but built in 2011. Here is what I found.

Driver Front - solid purple is hot. Solid black is ground.
Drivers Rear - Purple/Grey is hot. Black/Yellow is ground. I did not have a solid purple wire on the drivers rear door
Passenger Front - Solid purple is hot. Black/Yellow is ground.
Passenger Rear - Solid purple is hot. Black/Yellow is ground. I tried the Purple/Grey wire and it did not work

Aguero Ismael

What color wire did you use for driver side and passenger side front and back? I also have a 2014 f150 looking for the positive and negative wires to use on all four led door sills.

tland4

Why don't you guys just wire them to the third brake light...Well, really the cargo lights. They come in whenever the door is open, or whenever you unlock the truck.

Maybe it's just me, but I wouldn't care if all the door sills came on at the same time if I only opened one door since the dome light(s) would turn on and the other doors would be closed and covering the other lit up door sills. Just a thought

That's what I ended up doing with LED strips I installed in the footwells, just easier than finding out which wires are which