yones12

So I ordered this LED interior kit for my 10' F150. Consists of Map lights, Dome lights, License plate lights, Cargo lights and some spares. Every light works except the Dome lights. I tried all x3 and they won't work. When I pop them in place they do seem a little loose, But they are still making contact with the points...Hmmm. Any ideas?

yukonsjoy

Don't know if polarity is an issue, did you try just turning them around?

redneck wrencher

Are you saying they don't work even when swapping them around?

white_coyote_F150

I got mine from F150leds and had to swap them around to make them work try that if you haven't. Other than that I'd try pushing the contact points closer together so it will hold the bulb in place I had to do that as well

redneck wrencher

They are Light Emitting Diodes. They are polarity sensitive. I have them in my truck, as well.

yones12

I tried swapping them around, I'll try again and update just to make sure, Should i try to pinch the tabs to make a tighter fit?
Thanks,

white_coyote_F150

I would try pinching the tabs together I did it and it made it a little more snug just don't over do it and break the tabs...

yones12

Okay I will try that tomorrow, hopefully it works

yones12

*UPDATE* So i pinched the tabs together and bam! the lights work
Thanks All!!!