Black_Thunder

No worries I wont be using them for city driving anyway. I live in northern ontario Canada it's mostly bush & wild animals up here lolNo skyscrapers up here I also want to try and wire them up to work with my highbeams as well.

llangarica

contact Total Automotive Performance theyre a vendor on here. i got a set of Rigid Duallys, foglight adapter bracket, and plug+play harness adapter for about $220. install was very easy and required no splicing. i will post pics later.

Black_Thunder

That's still over $300CAD for "fog lights" when I can get the same setup for about $80CAD. Not trying to be an *** guys but Its just a mod Im doing because I can do it for cheap. Like i said I have 6000k Projector HID's & a 30" lightbar for fuctionality. I will be using the cubes for highway, back road driving and essentially they will just be for looks in town.

I would love to see pictures of your setup though, if you don't mind

llangarica

yeah i understand, i asked them to give me the regular duallys because they are asking $100 more for the DOT approved duallys... not gonna spend that much on fogs. this setup was pushing it.. lol.

you can use the adapter harness and the bracket with just about any LED cube, it just makes the whole install much easier. i think the bracket and adapter costs about $60 USD for both.

i just looked for pics on my phone, but i guess i didn't take any.. :/

Black_Thunder

damn, and just to make sure. Yours are the 3" correct? I read one guy say on instagram his were 4" but the majority seem to be 3"

llangarica

i believe they're 3". just whatever size the standard dually's are. they fit perfect in the fog light hole.

Black_Thunder

Do you guys think these will fit, they are a little bigger?? Im thinking they wont fit. Im having a hard time finding white cubes for around that price, from trustworthy stores with lots of product sold. Im only finding black ones.

http://www.ebay.com/itm/TWO-4-CREE-LED-FLUSH-MOUNT-LIGHT-LAMP-3X3-CUBE-POD-FORD-RAPTOR-TACOMA-ATV-/271555153952?hash=item3f39f2d020&vxp=mtr
Otherwise Im just going to buy these ones and plasti-dip them white. Might be the route Ill take as they seem like they will fit properly. That and I like the look of the 4 LED's better than 6

http://www.ebay.com/itm/161667891352?_trksid=p2060353.m1438.l2649&ssPageName=STRK%3AMEBIDX%3AIT

llangarica

The bottom ones would be the best fit for the fogs. I'm pretty certain The white flush mount lights won't fit.

These white cubes should work for you. http://www.dominationlighting.com/product/white-d3-pods
Not sure if they ship to canada tho.

RES4CUE

Here are some on Amazon



The white ones usually denote "marine" which is typically for boating. You may have better luck adding marine into the search bar like I did.

I did this mod and just popped buckets out of bumper, there are only 3 bolts holding it in. Two up top and one on bottom of bracket.

Then just measured how deep I wanted them, drilled a hole for bolts bracket. I used a large washer on the underside of the bucket to give it some strength. Then I just wired them into stock fig light wires and used stock switch.

Apeman

If you're going with a fog light that shines evenly in all directions you don't need to drill a new hole. Once you get the factory lights out you'll see a tab with a hole in it on the inside of the housing. I used that for fogs before I switched locations. There's also a good writeup in the how to section using a strip of metal which works great.