You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, so please join our community today!
As you may be aware, there are a few in here who have been hoping to have a modification to get the regular 4x4 trucks to engage the locker in 2wd. Looks like there is a working mod.
Can you get us pricing on the following Ford OEM parts.
- Raptor 4X4 switch Ford part #AL3Z-14B166-AA.
- Raptor TCCM(transfer case control module) Ford part #AL3Z-7E453-DC Motorcraft #TM-233.
- Offroad switch - # 14B166B
- Hill Decent switch - # 14B166A
- 4AUX switches - # 13D730 (SW-6760) Pretty sure this comes with the trim needed for all the switches.
Also Josh, can you check to see if the 4AUX switches do come with the plastic trim needed for the 4 switches and the Offroad and Hill Decent switches.
Is the trim available in different colours (or what colour does it come - Silver?)
There will be quite a few tuned in to your reply and I suspect you will start getting some orders if you post a paypal link like the Harley Tail Lights.
Thanks Josh.
Last edited by SpecialFX; 03-05-2011 at 11:22 AM.
Reason: added a few additional parts for pricing
I already looked into the aux switches. The switch panel comes complete with the panel, off-rad switch and hill decent switch all assembled. It is on back-order, mine should ship out to me on Monday. I also ordered the harness for the switch panel, but the rest of the wiring will be all custom and up to you, the rest of your truck is not wired for it. I don't have the part numbers here but they were really pretty cheap, Switches about $140-160 and the harness was $35. I'll post what I find when my parts show up. Good luck but this, the Raptor 4x4 switch and TCCM is plug and play. The Aux switches, off-road and hiil decent will all be custom. I wouldn't bother with the hill decent it goes to the pcm and with out a custom tune I don't think it will do anything.
I already looked into the aux switches. The switch panel comes complete with the panel, off-rad switch and hill decent switch all assembled. It is on back-order, mine should ship out to me on Monday. I also ordered the harness for the switch panel, but the rest of the wiring will be all custom and up to you, the rest of your truck is not wired for it. I don't have the part numbers here but they were really pretty cheap, Switches about $140-160 and the harness was $35. I'll post what I find when my parts show up. Good luck but this, the Raptor 4x4 switch and TCCM is plug and play. The Aux switches, off-road and hiil decent will all be custom. I wouldn't bother with the hill decent it goes to the pcm and with out a custom tune I don't think it will do anything.
Good to know. So is there a master part number for the panel if it comes all assembled or do you need to order the three separate numbers for the offroad, hill decent and aux switches?
Josh at tasca - need pricing on some raptor parts
Linear Mode
