Installing Power Folding Mirrors on 2012 F150 Lariat
#1
Installing Power Folding Mirrors on 2012 F150 Lariat
Has anyone tried installing power folding mirrors on a 2012 F150 Lariat. Is the wiring harness already set up for that? We have purchased the drivers side mirror and are trying to install it for that side only. Do we need to install both sides in order for it to operate properly? Any information would be appreciated.
#2
Grumpy Old Man
If your Lariat doesn't have the Lariat Plus option, then you don't have power fold mirrors.
And even if you installed the power fold mirrors, they probably wouldn't work without a lot of electrical wiring.
The mirrors will simply bolt onto the same place the stock mirrors were unbolted from, and the wiring harness will simply plug into the new mirrors with no problem. But probably they will have the same function as the stock mirrors. They won't have power fold unless you add wiring to the mirror wiring harness that will activate that function, and replace the mirror control swith on the door with the one for the power fold mirrors.
One way to check is to compare the electrical plug on the pickup to the electrical plug on the new mirror. If they don't have exactly the same number of pins in exactly the same place, then the power fold function is not going to work, even with the power fold control added to the door switch.
I went the other way. I replaced my Lariat Plus memory power fold automatic dimming mirrors with trailer tow mirrors that did not have the memory, power fold or automatic dimming built in. The wiring harness plugged in just fine, and the heated blinking and power mirror functions all work just fine. But the plugs for the memory, power fold, and automatic dimming functions were not in the plug on the tow mirrors, so those functions don't work.
And even if you installed the power fold mirrors, they probably wouldn't work without a lot of electrical wiring.
The mirrors will simply bolt onto the same place the stock mirrors were unbolted from, and the wiring harness will simply plug into the new mirrors with no problem. But probably they will have the same function as the stock mirrors. They won't have power fold unless you add wiring to the mirror wiring harness that will activate that function, and replace the mirror control swith on the door with the one for the power fold mirrors.
One way to check is to compare the electrical plug on the pickup to the electrical plug on the new mirror. If they don't have exactly the same number of pins in exactly the same place, then the power fold function is not going to work, even with the power fold control added to the door switch.
I went the other way. I replaced my Lariat Plus memory power fold automatic dimming mirrors with trailer tow mirrors that did not have the memory, power fold or automatic dimming built in. The wiring harness plugged in just fine, and the heated blinking and power mirror functions all work just fine. But the plugs for the memory, power fold, and automatic dimming functions were not in the plug on the tow mirrors, so those functions don't work.
Last edited by smokeywren; 03-11-2012 at 04:07 PM. Reason: fixit
#3
Power fold 2012. F150 xlt
Easy remove door panels easy get aftermarket power fold no relay needed find pins 16and 7 16 is fold 7 fold out run wirer from pass to driver connect both (if you pull on mirror connector the harness comes right out of mirror about 4 inch of wirer exposed (trace out pin 16 and 7 there it's easy) make both mirror connection 16 and 7 together than buy the switch on eBay about 24.00 run wirer from mirror driver side to switch pins 5 and 6 has wirer ther that's common ground 5 by pass relay push wirer into number 5 I taped and tie wrapped wirer going into 5 Easy way Now just fold down fo fold an up to open easy took me 30mins
#4
poor, easy??? I cant even follow your instructions, thats not even easy.. I was told by dealer the same as posted above, each truck is pre-wired for the functions, you can swap out mirror to mirror as long as it is wired to do the same functions you want from your new mirrors. If not you got to run new harness to add the extra functions.
#6
poor, easy??? I cant even follow your instructions, thats not even easy.. I was told by dealer the same as posted above, each truck is pre-wired for the functions, you can swap out mirror to mirror as long as it is wired to do the same functions you want from your new mirrors. If not you got to run new harness to add the extra functions.
Trending Topics
#8
Girthy Member
Yes, it is this easy! I don't remember the pin numbers but this sounds right.