Have You Been Wanting Amp Retractable Steps?
#11
Senior Member
I've read that they can be cut to fit a regular cab. I'm about ready to pull the trigger on some. I'm just wondering if there are more than one set of mounting holes under the running boards for different bracket locations? I know my brackets need to be closer together than on a Screw or a Scab.
#13
Brodozin' through life
iTrader: (3)
I've read that they can be cut to fit a regular cab. I'm about ready to pull the trigger on some. I'm just wondering if there are more than one set of mounting holes under the running boards for different bracket locations? I know my brackets need to be closer together than on a Screw or a Scab.
The following users liked this post:
NASSTY (02-01-2015)
#14
Member
The only positioning required is the brackets for your cab configuration, the boards themselves as posted can slide any length front to back, having a regular cab you will definitely want to cut to fit or maybe not. They are the exact same length as the oem nerfs my scab came with.
The following users liked this post:
NASSTY (02-01-2015)
#15
Senior Member
As mentioned, there are aluminum stud pieces mounted in rails on the step boards. These will allow you to position the boards wherever front to back of truck. Then once tightened down they press fit into a pocket to be ultra secure and prevent movement and noises.
On my scab I had to mount the motor arm forward n passenger side due to frame contact but this is detailed in the instructions.
On my scab I had to mount the motor arm forward n passenger side due to frame contact but this is detailed in the instructions.
#18
Senior Member
I dunno Keith, you keep pulling stuff like this and there are going to be a bunch of truck owners around here that won't be able to wipe the smiles off their faces. Just THINK about the consequences!
:thum bup:
(Thanks Keith!!!)
Last edited by STingray1300; 02-05-2015 at 05:34 PM.
The following 2 users liked this post by STingray1300:
Autoplicity (02-24-2015),
RES4CUE (02-05-2015)