Genos 9" android tablet install
02-19-2014, 12:16 AM
#772
I downloaded and restored Tasker1107.zip that YellowFinii built on my 2013 Nexus 7 - I didn't change anything, the animation starts but only on part of the screen, in the center of it, maybe 1/9 of the screen surface is used.
Did anybody hit this issue? How should I fix it to get the video and everything on full screen.
The size of the images/animation is the same as when the device is in portrait mode. Not really sure why.
thank you
Did anybody hit this issue? How should I fix it to get the video and everything on full screen.
The size of the images/animation is the same as when the device is in portrait mode. Not really sure why.
thank you
Last edited by geniepro; 02-19-2014 at 12:37 AM.
The following users liked this post:
waynezim (03-11-2014)
02-22-2014, 02:16 AM
#776
Senior Member
I downloaded and restored Tasker1107.zip that YellowFinii built on my 2013 Nexus 7 - I didn't change anything, the animation starts but only on part of the screen, in the center of it, maybe 1/9 of the screen surface is used.
Did anybody hit this issue? How should I fix it to get the video and everything on full screen.
The size of the images/animation is the same as when the device is in portrait mode. Not really sure why.
thank you
Did anybody hit this issue? How should I fix it to get the video and everything on full screen.
The size of the images/animation is the same as when the device is in portrait mode. Not really sure why.
thank you
The whole start up was meant to be in Landscape mode.
It sounds to me your tablet has a higher resolution than mine. What you'll have to do is manually adjust the usable screen size in the tasker scenes.
Edit:
http://www.pocketables.com/2012/09/b...-3-scenes.html
What you'll need to do is go into the scene and modify the usable space to take up the screen size on the scene size and the element (the video or picture)
After you check that, run it if the video isn't full screen... Then you'll have to use one of the higher resolution images/video (they are in gif format) in my Google drive.. Link below.
https://docs.google.com/folder/d/0B2...4xRkJCa1U/edit
Last edited by YellowFinii; 02-22-2014 at 02:23 AM.
02-26-2014, 07:23 AM
#778
I also tried using yellows files did not work for me( have a dell venue 8 IDK if that y ) so I played with it a couple of days and set myself
here is what I did
how to set up start up:
open tasker, click profile, click the + at the bottom, and choose
"State">"Power">"Power">
Source = any
do the exact same thing under a new profile but check off "invert" for your power off setting.
now for tasks on start up
tasks:
net>bluetooth>on
net>gps>on
app>load app>Torque
app>load app>music player
display>auto brightness>on
Misc>Say>Welcome Jon
display>Display Timeout>23 hours 59 min 59 seconds
Shut down
under your power off profile you created earlier. create the tasks being the complete opposite of what you did for on.
net>bluetooth>off ( I disabled because I like to leave on now)
net>gps>off
app>kill app>Torque
app>kill app>music player
Misc>Say>goodbye Jon
display>Display Timeout>7 seconds
here is what I did
how to set up start up:
open tasker, click profile, click the + at the bottom, and choose
"State">"Power">"Power">
Source = any
do the exact same thing under a new profile but check off "invert" for your power off setting.
now for tasks on start up
tasks:
net>bluetooth>on
net>gps>on
app>load app>Torque
app>load app>music player
display>auto brightness>on
Misc>Say>Welcome Jon
display>Display Timeout>23 hours 59 min 59 seconds
Shut down
under your power off profile you created earlier. create the tasks being the complete opposite of what you did for on.
net>bluetooth>off ( I disabled because I like to leave on now)
net>gps>off
app>kill app>Torque
app>kill app>music player
Misc>Say>goodbye Jon
display>Display Timeout>7 seconds
So ^^^^^ is very helpful. I am getting ready to install the same tablet in my truck. Anything that you would say "I wish I would have known earlier. "
Thanks
02-26-2014, 02:46 PM
#779
OTG and Power
This is some information on how to power your N7 from a otg cable while using the cable. Requires a kernal. But it is some information. http://mehrvarz.github.io/usb-host-m...gement-nexus7/
