Topic Sponsor
2009 - 2014 Ford F150 General discussion on 2009 - 2014 Ford F150 truck.
Sponsored by:
Sponsored by:

Found some plug and play LED foglights similar to morimoto XB on amazon for cheap

Thread Tools
 
Search this Thread
 
Old 01-23-2017, 11:00 AM
  #251  
Senior Member
iTrader: (1)
 
lewis26's Avatar
 
Join Date: Aug 2012
Location: Southern Indianapolis
Posts: 1,036
Received 223 Likes on 153 Posts

Default

Originally Posted by MCDavis
I'm actually starting to really like these LEDs. I took out the Rigid SAEs and sent them off for a warranty inspection. I'm going to be hesitant to put the SAEs back in the truck once they return.

Maybe I should put the SAEs on the back where I currently have the SRM cubes mounted for reverse lights....hhmmm. That sure would wake up a few motorists if the SAEs come on while they're tailgating.
I'm enjoying them a lot too. While I never had SAE's, I had a set of the putco bulbs and these blow them out of the water. The foreground lighting is fantastic. Combined with the bambi mod enabled in forscan, OEM HID high beams, these fogs, and my lightbar, it's a wall of light on dark back roads.

I have a cheap set of led pods mounted below my bumper, and they're hooked up to a switch. They're awesome to flash tailgaters with.
Old 01-23-2017, 11:33 AM
  #252  
Senior Member
iTrader: (1)
 
MCDavis's Avatar
 
Join Date: Jan 2014
Location: RVA
Posts: 2,036
Received 570 Likes on 473 Posts

Default

Originally Posted by lewis26
I'm enjoying them a lot too. While I never had SAE's, I had a set of the putco bulbs and these blow them out of the water. The foreground lighting is fantastic. Combined with the bambi mod enabled in forscan, OEM HID high beams, these fogs, and my lightbar, it's a wall of light on dark back roads.

I have a cheap set of led pods mounted below my bumper, and they're hooked up to a switch. They're awesome to flash tailgaters with.
The SAEs are brighter than these, and the pattern is rectangular. It's impressive. My SRM cubes are around 800 lumens each, and the SAEs are something near 1700 lumens each...could be fun!
Old 01-23-2017, 11:53 PM
  #253  
Senior Member
 
steve392's Avatar
 
Join Date: Oct 2011
Location: Little Ferry, New Jersey
Posts: 926
Received 66 Likes on 60 Posts

Default

Originally Posted by msgross
I installed mine this weekend, easy install but i'm thinking of reselling them on here. I have chrome bumpers so it's not the look i'm going for.
I might be interested in them if you sell them.
Old 01-24-2017, 11:19 AM
  #254  
OG
Thread Starter
 
cmbezln's Avatar
 
Join Date: Aug 2008
Posts: 1,461
Received 243 Likes on 194 Posts

Default

FYI- The molex connectors inside the female plug for these fogs can slide back easily apparently, one of mine went out yesterday after I was doing some work on my HIDs and when I pulled the plugs apart I noticed the molex connector had recessed back, probably when i put tension on the wires.

I'm sure most of you didn't splice in the female connector like i did and just plugged in the stock one, but in case you did watch out for that.
The following users liked this post:
MCDavis (01-24-2017)
Old 01-24-2017, 11:23 AM
  #255  
Senior Member
 
msgross's Avatar
 
Join Date: Sep 2009
Posts: 356
Received 45 Likes on 39 Posts

Default

Originally Posted by steve392
I might be interested in them if you sell them.


I initiated a refund with Amazon, they cause too much static on my FM channels (the weaker ones). If you want them I would have to get my $40 back out of the deal (paypal fees and shipping on you) PM me if so, I will be returning them this weekend.
Old 01-24-2017, 10:01 PM
  #256  
Member
 
chappy227's Avatar
 
Join Date: Jan 2016
Posts: 65
Likes: 0
Received 2 Likes on 2 Posts
Default

Originally Posted by cmbezln
FYI- The molex connectors inside the female plug for these fogs can slide back easily apparently, one of mine went out yesterday after I was doing some work on my HIDs and when I pulled the plugs apart I noticed the molex connector had recessed back, probably when i put tension on the wires.

I'm sure most of you didn't splice in the female connector like i did and just plugged in the stock one, but in case you did watch out for that.
Mine did exact same thing.
Old 01-24-2017, 10:01 PM
  #257  
Member
 
chappy227's Avatar
 
Join Date: Jan 2016
Posts: 65
Likes: 0
Received 2 Likes on 2 Posts
Default

Originally Posted by msgross
I initiated a refund with Amazon, they cause too much static on my FM channels (the weaker ones). If you want them I would have to get my $40 back out of the deal (paypal fees and shipping on you) PM me if so, I will be returning them this weekend.
Have noticed that also with mine when I turn them on.
Old 01-26-2017, 08:26 AM
  #258  
Senior Member
 
paintballdude05's Avatar
 
Join Date: Aug 2013
Location: Sudbury, Ontario
Posts: 1,244
Received 141 Likes on 135 Posts

Default

I finally got my sets last night. You guys weren't kidding, these are bright! I bench tested them against some BMW X5 OEM LED foglights I had kicking around and these blow those out of the water as far as light output goes. However, the cut off isn't as sharp and the light distribution isn't at nice, but these are somewhat minor things. Hopefully I can get them installed in the next few days!
Old 01-26-2017, 08:41 AM
  #259  
American member
 
Masi1926's Avatar
 
Join Date: Dec 2011
Location: North of Boston Ma.
Posts: 6,651
Received 1,058 Likes on 843 Posts

Default

I finally got them leveled to exactly what works for me. They definitely broadcast a wider, longer light.
So... So far, so good and I'm not bothering oncoming traffic.
I haven't experienced any interference with my stereo, thankfully....

I do wish they where a little more level looking in the housing.. They are tilted just a couple degrees, but honestly nobody would notice or care but me.
Old 01-26-2017, 08:52 AM
  #260  
Senior Member
iTrader: (1)
 
MCDavis's Avatar
 
Join Date: Jan 2014
Location: RVA
Posts: 2,036
Received 570 Likes on 473 Posts

Default

Originally Posted by masitile
I do wish they where a little more level looking in the housing.. They are tilted just a couple degrees, but honestly nobody would notice or care but me.
I noticed...they are driver side low, passenger side high. It's most noticeable when trying to align them on a wall as the far "tips" of the beam pattern are not horizontal. Do I care?...not for $40!!!


Quick Reply: Found some plug and play LED foglights similar to morimoto XB on amazon for cheap



All times are GMT -4. The time now is 01:19 AM.