Last edit by: IB Advertising
Issue: Ford Remote Access app review
The Ford Remote Access app is available for both IPhone and Android users to control vehicle features. The app lets you remote start, remote stop, lock, unlock, audible car find, and there is even an optional feature to receive security notifications.
Read to find out more:
The Ford Remote Access app is available for both IPhone and Android users to control vehicle features. The app lets you remote start, remote stop, lock, unlock, audible car find, and there is even an optional feature to receive security notifications.
Read to find out more:
- What, if any, are the costs associated?
- Do you have to go to the dealer?
- What hardware is compatible?
- How well does it work compared with aftermarket devices?
- What models are compatible?
Ford Remote Access app for smart phones
#511
Senior Member
#512
You would uninstall the connector going into the TPM module and put it back to stock configuration. The new RMU integrates through the OBD port on the drivers side. Ford Tech hotline did say that there is a port on the side of the RMU module in which you can plug your long range antenna into and still use your Bi-Directional remote in conjunction with the Remote Access system.
-Benny
#513
Senior Member
Unfortunately you would need to purchase the 2 components or if you can find the older version kit that should do as well.
You would uninstall the connector going into the TPM module and put it back to stock configuration. The new RMU integrates through the OBD port on the drivers side. Ford Tech hotline did say that there is a port on the side of the RMU module in which you can plug your long range antenna into and still use your Bi-Directional remote in conjunction with the Remote Access system.
-Benny
You would uninstall the connector going into the TPM module and put it back to stock configuration. The new RMU integrates through the OBD port on the drivers side. Ford Tech hotline did say that there is a port on the side of the RMU module in which you can plug your long range antenna into and still use your Bi-Directional remote in conjunction with the Remote Access system.
-Benny
I went down to my truck and pulled out the RMST module from my 200 series. There are no open plugs that match the RMU's, only a 4 pin which i have no idea what it's for.
I wont be buying this setup if that is the case. A big F-U to Ford from me.
The following 3 users liked this post by iyaayas12:
#517
UPDATEING
the thing only worked once or twice out of 10 trys
DEALER WAS USELESS, he still waiting for tech support to get back to him(its been 2 weeks)
Turns out the problem lies in the aftermarket HID ballast.
Disconnected them and everything is working as it should
I have the same setup for a 2012.
Lately I'v been getting a lot of "can not connect try later "messages
another thing is the sleep mode is a PITA (you have to use it within 2 days or you have to physically use the key )and I haven't figured out how to override it. Do you know anything about it??
Lately I'v been getting a lot of "can not connect try later "messages
another thing is the sleep mode is a PITA (you have to use it within 2 days or you have to physically use the key )and I haven't figured out how to override it. Do you know anything about it??
DEALER WAS USELESS, he still waiting for tech support to get back to him(its been 2 weeks)
Turns out the problem lies in the aftermarket HID ballast.
Disconnected them and everything is working as it should
#518
Are they ****ty cheap old school analog ballasts!?
I didn't even think those.existed anymore!?
I didn't even think those.existed anymore!?
#519
Thats subjective to opinion, do you consider
D2S MORIMOTO 5FIVE , MM relay ,SVS bulbs, to be ****ty and cheap?
They
Reinvented them for 2014!
EMI shielding .
#520
Senior Member
If they cause your remote start to not work id have to say yes, lol