Flowmaster Side Exit... Issue?
#1
Flowmaster Side Exit... Issue?
So, I threw my Flowmaster exhaust on the truck today and ran into a bit of an issue. Had the truck up on the lift and the rear section wouldn't clear the spring at full droop. This could turn into a massive issue down the road. Ended up installing and welding with the truck on the ground. Anyone else run into this?
I now have NO idea how I'm going to rack the stupid thing for other reasons without crushing the exhaust. I might just lop it off and not have a tip. Slightly frustrating. I'll call Flowmaster tomorrow and ask for some explanations.
I now have NO idea how I'm going to rack the stupid thing for other reasons without crushing the exhaust. I might just lop it off and not have a tip. Slightly frustrating. I'll call Flowmaster tomorrow and ask for some explanations.
#3
Noob
Join Date: Dec 2011
Location: Midwest City, Oklahoma
Posts: 141
Likes: 0
Received 21 Likes
on
11 Posts
Not sure if this is what your looking for but this is what I had done on mine. The guy said it took a while to bend it to exit and clear everything. If you need a better pic I can go take one.
#4
That is probably what I'm going to end up having to do. Just think Flowmaster could have made the kit actually fit properly. On the positive side I can have a plain Jane looking outlet now.