What does your lift kit measure?
#1
Senior Member
Thread Starter
What does your lift kit measure?
I have been seeing a good bit of similar posts about different lift kits that are supposed to be 6" but not a full drop. I have called a few companies to get measurements of the crossmember drop from eye to eye:
Rough country said 5.25 drop and spacer gives the full 6"
Skyjacker said 4 3/4 drop
I'm looking to find a kit that will give me the closest to a full 6" and keep the factory geometry. If you have a kit not listed could you post what kit you have and give a crossmember drop measurement?
Rough country said 5.25 drop and spacer gives the full 6"
Skyjacker said 4 3/4 drop
I'm looking to find a kit that will give me the closest to a full 6" and keep the factory geometry. If you have a kit not listed could you post what kit you have and give a crossmember drop measurement?
#5
the 04-08 lift from RXC was 4 5/8's drop eye to eye... possible they changed it but i've personally measured it.... they also use the same drop bracket for their 4" and 6" lifts for those years too.
#6
Senior Member
Thread Starter
I remember measuring mine but it was a long time ago on a 2012 but I think it was 5.25 and that's what rough country confirmed also
#7
Trending Topics
#8
Senior Member
Thread Starter