Finally installed my Led Puddles...
#1
One Clean Machine
Thread Starter
iTrader: (5)
Finally I picked up a pair of oem Puddle Lamps, and retrofit them with 31mm 6-chip Samsung Led festoons!
Instead of running the wires from the puddle lamps into the CabSide of the Mirror Wire Harness... I ran the Negative to the rear facing Blinkers! Then I ran the + wire into the miiror side of the Connector(to the Purple Wire on cab side of harness), and hot glued it into place! I also, took out the Reflector as you can see in my 2nd pic to make more room for the led festoon!
I was really surprised with how EZ this mod was(other than waiting 28 hrs for the RTV to Dry), and the Amount of Light these small Leds put out...
I used Clear RTV, to keep them looking clean. As well as, I left them Clamped together for a total of 28 hrs to let the RTV fully cure. I even put a dab of RTV on the interior side of the puddle access hole to keep out Unwanted Moisture...
Don't know why anyone would spend close to $100 for someone else to do this Very EZ mod. for them!!!
Heres a few pics...
Instead of running the wires from the puddle lamps into the CabSide of the Mirror Wire Harness... I ran the Negative to the rear facing Blinkers! Then I ran the + wire into the miiror side of the Connector(to the Purple Wire on cab side of harness), and hot glued it into place! I also, took out the Reflector as you can see in my 2nd pic to make more room for the led festoon!
I was really surprised with how EZ this mod was(other than waiting 28 hrs for the RTV to Dry), and the Amount of Light these small Leds put out...
I used Clear RTV, to keep them looking clean. As well as, I left them Clamped together for a total of 28 hrs to let the RTV fully cure. I even put a dab of RTV on the interior side of the puddle access hole to keep out Unwanted Moisture...
Don't know why anyone would spend close to $100 for someone else to do this Very EZ mod. for them!!!
Heres a few pics...
Last edited by Toddman38; 06-17-2014 at 07:36 PM.
The following 2 users liked this post by robertthansen150:
Toddman38 (06-16-2014),
tuxedoblk_5.oh (11-01-2015)
#4
One Clean Machine
Thread Starter
iTrader: (5)
So, I waited till a reasonably price pair became available! Glad I waited, and very Happy with my results...
Last edited by Toddman38; 06-16-2014 at 02:06 AM.
#6
Senior Member
Trending Topics
The following users liked this post:
Toddman38 (06-16-2014)
#9
One Clean Machine
Thread Starter
iTrader: (5)
#10
One Clean Machine
Thread Starter
iTrader: (5)