factory unlock code 2013 FX4 Screw
#1
Senior Member
Thread Starter
factory unlock code 2013 FX4 Screw
Can anyone tell me where I can find the factory unlock code for the door pad on a 2013 FX4 screw?
My truck was bought new, never came with the little card, Ford wants 50$ to reset it for me, **** that! I will do it myself, but have looked at the user manual and searched the truck, cant find the factory code anywhere...
Thanks in advance!
My truck was bought new, never came with the little card, Ford wants 50$ to reset it for me, **** that! I will do it myself, but have looked at the user manual and searched the truck, cant find the factory code anywhere...
Thanks in advance!
#3
Displaying the Factory Set Code
Note: You will need to have two programmed passive anti-theft keys for
this procedure.
To display the factory set code in the information display:
1. Insert a key into the ignition and turn the ignition on for a few
seconds.
2. Turn the ignition off and remove the key.
3. Insert the second key into the ignition and turn the ignition on.
The factory set code will display for a few seconds.
Note: The code may not display until after any other warning messages
first display.
Note: You will need to have two programmed passive anti-theft keys for
this procedure.
To display the factory set code in the information display:
1. Insert a key into the ignition and turn the ignition on for a few
seconds.
2. Turn the ignition off and remove the key.
3. Insert the second key into the ignition and turn the ignition on.
The factory set code will display for a few seconds.
Note: The code may not display until after any other warning messages
first display.
#5
Senior Member
Mine is located behind plastic kick panel at passenger side footwell. It has code on the black box with white label with large barcode and 5 digit lock code and L (ie. 12345L ).12345 would be the code in this example. HTH
#6
Senior Member
Thread Starter
Tried that several times, no dice. I'll take a look around the glove box or kick board.
Thanks
Thanks
Displaying the Factory Set Code
Note: You will need to have two programmed passive anti-theft keys for
this procedure.
To display the factory set code in the information display:
1. Insert a key into the ignition and turn the ignition on for a few
seconds.
2. Turn the ignition off and remove the key.
3. Insert the second key into the ignition and turn the ignition on.
The factory set code will display for a few seconds.
Note: The code may not display until after any other warning messages
first display.
Note: You will need to have two programmed passive anti-theft keys for
this procedure.
To display the factory set code in the information display:
1. Insert a key into the ignition and turn the ignition on for a few
seconds.
2. Turn the ignition off and remove the key.
3. Insert the second key into the ignition and turn the ignition on.
The factory set code will display for a few seconds.
Note: The code may not display until after any other warning messages
first display.
#7
Senior Member
Trending Topics
#8
Senior Member
Can anyone tell me where I can find the factory unlock code for the door pad on a 2013 FX4 screw? My truck was bought new, never came with the little card, Ford wants 50$ to reset it for me, **** that! I will do it myself, but have looked at the user manual and searched the truck, cant find the factory code anywhere... Thanks in advance!
#9
Boost :)
#10
Member
Can anyone tell me where I can find the factory unlock code for the door pad on a 2013 FX4 screw?
My truck was bought new, never came with the little card, Ford wants 50$ to reset it for me, **** that! I will do it myself, but have looked at the user manual and searched the truck, cant find the factory code anywhere...
Thanks in advance!
My truck was bought new, never came with the little card, Ford wants 50$ to reset it for me, **** that! I will do it myself, but have looked at the user manual and searched the truck, cant find the factory code anywhere...
Thanks in advance!
As stated before, you need two keys, if you bought it new you should have them, put the first key in and turn to run, NOT start, wait until the video displays, (2-3 secs) take key out and insert 2nd key and turn to run, now your center cluster screen will show you what your door key pad code is.
Made a video how here's a link.
.
The following users liked this post:
Anthony86 (09-12-2014)