Factory Remote Start Security System Self Install
08-25-2009, 10:25 PM
#1
Factory Remote Start Security System Self Install
I begun the install on the Gold Remote Start Security System and am very confused... In the below images you can clearly see that they instructions do not match up with the assembly that I received with the kit. The open spots are blank and have no soldered connectors on them. Anyone install this kit? If so please please post a pic of how yours is set up.
Thanks!!
Thanks!!
Last edited by slimcubby; 08-25-2009 at 10:30 PM.
08-28-2009, 09:26 PM
#4
what kit number are you using
installed a bi-directional remote start only
go to http://www.fordaccessoriesstore.com/GfaWeb/techSpecs.do
look at the instructions for
Remote Start (2008 Model Year Vehicles)--Truck, yes wrong year/type but i think this is what you need, page 105
if not I'll pull mine and picture it for you
installed a bi-directional remote start only
go to http://www.fordaccessoriesstore.com/GfaWeb/techSpecs.do
look at the instructions for
Remote Start (2008 Model Year Vehicles)--Truck, yes wrong year/type but i think this is what you need, page 105
if not I'll pull mine and picture it for you