F150Lifts Grill Light Kit
#71
Custom User Title!
Does anyone have a shot of how they are wired in? These attach to the grille itsself correct? So when the hood is up is the wiring hanging between the grill and then down to the headlights to splice in?
#72
<b>F150 Forum</b>
Thread Starter
KPT2, The lights adhere to the upper part of the grill. The wire harness goes to the passenger side then inside the hood insulation...over to the passenger fender and then to the passenger side light. It is all neat and tidy with the included zip ties and zip tie mounts. I'll post all the pics tomorrow for you.
Last edited by HaloLifts; 10-23-2014 at 10:47 PM.
#73
Custom User Title!
KPT2, The lights adhere to the upper part of the grill. The wire harness goes to the passenger side then inside the hood insulation...over to the passenger fender and then to the passenger side light. It is all neat and tidy with the included zip ties and zip tie mounts. I'll post all the pics tomorrow for you.
#74
<b>F150 Forum</b>
Thread Starter
#75
<b>F150 Forum</b>
Thread Starter
Hey Guys...anyone in Canada we just found out that shipping the Grill Light Kit to Canada is only $9.95 USD.
I was so busy today I did not have a chance to take pics...I will see if I can tomorrow. Sorry guys.
I was so busy today I did not have a chance to take pics...I will see if I can tomorrow. Sorry guys.
Last edited by HaloLifts; 10-24-2014 at 09:23 PM.
#78
<b>F150 Forum</b>
Thread Starter
^ PM sent Matt
We have an 2012 FX4 and install was a snap. I am going to post pics of where we attached the lights. You need 3 flat spots. The lights can adhere right side up or turned over and be adhered upside down. If they can not be installed on a C clamp grill we will re-design..so they will fit a C clamp grill.
Anyone in Denver with a C grill, get in touch with me lets do an install on your truck and post the pics. GLK is on us.
We have an 2012 FX4 and install was a snap. I am going to post pics of where we attached the lights. You need 3 flat spots. The lights can adhere right side up or turned over and be adhered upside down. If they can not be installed on a C clamp grill we will re-design..so they will fit a C clamp grill.
Anyone in Denver with a C grill, get in touch with me lets do an install on your truck and post the pics. GLK is on us.
Last edited by HaloLifts; 10-25-2014 at 10:40 AM.
#80
Senior Member
Here's mine ......
I made my own mounts from scrap metal , and bought the lights off eBay for 8.00 shipped , by the way these rectangle Led's do NOT have 3 separate lights in each for a total of 9 , as stated prior by someone .... There is just one , the bezel makes it look like 3 separate little leds when on , not 3 just One really bright little led ...... I do like the wiring harness that comes with the f150 lifts kit , but then again I made one almost Identical for a couple bucks .... F150lifts produces some damn good products , do lots of R&D and putting out new gear for our trucks ... I thank them for that ... sorry Im a tight *** but there are many of us that like what you do and want what you have but its just out of our price range , so we do what we can to accomplish the same look at a lower cost ...... I posted this for the guys that work hard outside in the hot and cold all day long and don't get paid much for doin it