Console swap??????
#1
Cody "schrec"
Thread Starter
Console swap??????
Okay I know that there has been people that have swapped the jump seat for a center console, but has anyone swapped the jump seat for the flow through console? If so what's all needed?
#3
One Clean Machine
iTrader: (5)
Op have done it, you'll need A lot of pieces, mostly dash trim,a AC duct for the flow through and such... Theres a Few Threads on How To...
The following users liked this post:
Schrec1992 (03-02-2014)
#4
Cody "schrec"
Thread Starter
Any idea as where I can get just the trim pieces? Not worried about the vents on it, have plans for something else where they are, I found a good deal on a flow through just curious where I can get the trim pieces.
#5
One Clean Machine
iTrader: (5)
Ebay, craigslist, or Tasca Ford is usually Reasonable...
The following users liked this post:
Schrec1992 (03-02-2014)
#6
I would check tasca, or fords parts site but that will be way more expensive. Or google search ford oem parts and compare prices. If you can find parts numbers it will make the search way easier.
Man Toddman beat me to it while I was typing.
Man Toddman beat me to it while I was typing.
The following users liked this post:
Schrec1992 (03-02-2014)
Trending Topics
#8
Senior Member
here is mine
https://www.f150forum.com/f38/flow-t...2013-a-237008/
and this is [MENTION=94921]mamonti[/MENTION]
https://www.f150forum.com/f38/dont-t...onsole-148770/
I purchased my vent pieces through tasca for cheap. <120 for both. i have a column shifter, so i had fiberglass cubbies made for the holes and laid carpet inside them
https://www.f150forum.com/f38/flow-t...2013-a-237008/
and this is [MENTION=94921]mamonti[/MENTION]
https://www.f150forum.com/f38/dont-t...onsole-148770/
I purchased my vent pieces through tasca for cheap. <120 for both. i have a column shifter, so i had fiberglass cubbies made for the holes and laid carpet inside them