COMPLETE Upfitter switch install into 2013 F150 Platinum
#82
Is it Friday Yet?
iTrader: (1)
Switch Bezel with all switches CL3Z-13K724-BA
OR switches only
Hill Descent switch AL3Z-14B596-AA
4WD Control switch AL3Z-14B166-AB
Upfitter switch AL3Z-13D730-AA
Wiring Harness AL3Z-14A318-SA
Last edited by soaringfalcon; 10-13-2015 at 01:34 PM. Reason: fixed copy paste oops
#83
#84
Is it Friday Yet?
iTrader: (1)
The upfitter will still require a relay box - 9C3Z-14A303-A
As for the other two switches, you will need to find something for them to do, there is nothing on an F150 that they can be connected to, since there is not Off-Road 4WD function and the downhill descent already has a switch.
As for the other two switches, you will need to find something for them to do, there is nothing on an F150 that they can be connected to, since there is not Off-Road 4WD function and the downhill descent already has a switch.
#85
The upfitter will still require a relay box - 9C3Z-14A303-A As for the other two switches, you will need to find something for them to do, there is nothing on an F150 that they can be connected to, since there is not Off-Road 4WD function and the downhill descent already has a switch.
#87
Alright thanks. I have a few sets of rigid leds that come prewired with relays and fuses so all I need to do is cut the switch off and wire it to the upfitter harness
#88
Senior Member
It isn't quite that simple. Do some searching on the wiring of the upfitter switch. The switch puts out a ground connection when the switch is engaged, so the relays need to be wired in differently than a normal switch like the rigid lights come with. Normally when wiring a switch, the switch puts the positive power to the relay. The upfitter switches will put the negative to the relay. The relays will have to be rewired so that they have constant positive power, and when the upfitter switch connects the negative, the relay will engage.
The following users liked this post:
soaringfalcon (10-14-2015)
#89
For an easy install. Get a fuse tap, run it to the horn fuse. Then run a power wire to mounting location. Wire all the wires from the upfitter relay harness together into the power wire. Ground your relay harness to the metal dash screw. Mount the switch panel. Wire up Accessories to the four upfittwr wires of your choice.
#90
For an easy install. Get a fuse tap, run it to the horn fuse. Then run a power wire to mounting location. Wire all the wires from the upfitter relay harness together into the power wire. Ground your relay harness to the metal dash screw. Mount the switch panel. Wire up Accessories to the four upfittwr wires of your choice.