FX4HAWAII

I'm sure this has been asked and answered but I couldn't find the thread so. I have the appearance package 20inch rims on my truck which is stock. What the biggest tire I can put on my rims without a leveling kit? I might go with the rancho quick lift and if so what is the biggest tire I can put on with that? My goal is for my truck to have that wide stout look like the old F150s used to have. I'm really not interested in a lift at most a leveling kit. Thanks and please post some pics

rangerrick

The long answer......If you have the time you can do what I did & read through the 264 pages in the Tire and Wheel Fitment Guide - 2009 and newer. Its a sticky at the top of this forum. There are lots of user posts with pictures. I found it to be very helpful in my research.

PawPaw

I had these 305x55x20 (33.2x12.6) Nitto Terragrapplers on my stock 20's at stock height with no problems other then being close to the upper control arm. Truck was leveled later..

Half_ton

295/60/20 on mine with a 2.5" level. I bet they would have just fit without a level

FX4HAWAII

Ok thanks guys

S197Mach1

I saw on the tire and thread post 305/55/20 with factory height. Where in Hawaii are you?

Gonkey

I ran 33x12.5r20 general grabbers at stock height with no issues.they spec at 11.5 tread width and 32.9 inch tall.check my photos of stock heighth.It is very tight but worked till i got to level kit.

Bennyboy

285/65s here. 295/60s are slightly shorter but wider and rubbed my control arm.

ggallant1

Paw Paw i dont think i have seen a pic of your truck since you switched to the AT2's. Do you like them better than the Nittos?

techrep

iTrader: (1)

Nitto web site says 305/55/20 trail graps are 33.9/12.6 ??