B4manek

Probably came with the supercharger on it but unconnected lol. $48 bought him a new belt.

Fordman1979!

Lol, you guessed it!

M0RRIS

It's a divider, I made one also from an idea early in this thread. It's not as elaborate as this one and I have no intentions of branding it. It's just nice to have. Go to the nursery and bring home flowers, go to the dump with used oil, things like that.

13f150plat

iTrader: (1)

How's this for 11.91
Oil fill extension neck
Should have come with truck from ford

UH60driver

I agree. I installed one a while back.

https://www.f150forum.com/f38/best-m...7/#post4448387

Chris's FX4

I'm curious if you guys are able to remove yours easily. I installed one too a while back and went to try and remove it for something and it seems like if I twist it any further something is going to snap on it.

UH60driver

I've looked into it just to see and couldnt figure out WO snapping it off.

13f150plat

iTrader: (1)

sorry here are pics
and if you push down on the engine cover it clears the tab that it snags on and holds in it in place
there is a molded plastic ridge it catches on

13f150plat

iTrader: (1)

also its 2 things .. 1 is 6 over the 50 limit but worth posting anyway


so my fog lights... plastic housing drove me nuts... cracks.. gets water in it .. changed to HID's and bulb rattles lose and I change it like 2-3 times..


nope no more


ebay... 56 replacement brackets to mouth 3-4 cube LED lights
ebay... 30.00 24W 6 bulb CREE cube lights...


total install time...under an hour... each side took about 20-25 min total


ill get pics of lights on ... I snapped a quick pic as I parked the truck here is what looks like... and for EBAY lights.. trust me plenty bright .. no need to spend 150 for name brand rigid.. when 30 for pair will do

Black_Thunder

ya i did the same except I didnt need replacement brackets, I used the brackets it came with. $55.00 for white cubes, for whatever reason white cubes cost more than the black ones. Yes i angled them on purpose