johnday in BFE

iTrader: (1)

Yes, AZ has them. I used the amber 6 LED strips in my mirrors. After you cut out the back of the reflector, and insert the strip, fill the whole thing with RTV, and let dry. Mine have been in use for about 2 years now, and zero problems with water.

RocSTX

F150LED sells the LED turn signal strips specifically for this. 40$. They're not cheap but comes already at length and ready for install

johnday in BFE

iTrader: (1)

That's just the LED strip?

I think mine were less than $15.

Brett2013fx4

Hell yeah lol I used AZ strip as wheel well let's on my old ranger for a year and a half and they worked all the way until I traded it in and then I pulled them off


That's crazy. Sounds like a waste of 30 bucks

Waterfowler41

iTrader: (1)

Or you can go on Amazon and order the 24" alpena led stripe for $20. And look in the mirror reflector to turn signal thread for best practices.

travelrider

I did four "under $50" mods (each) with a spare 20 minutes last week.





Delete reflectors





Tailgate Assist





LED Backup Lights





50cal bullet Antenna - don't mind the Dirty Truck - oak pollen is driving me nuts this time of year.

The bullet antenna is by www.cravenspeed.com -- 10% off through end of March with coupon code: TACTICAL






-

Jesso2k

A few things going on in today's pic:

1. Took the air dam off from the front bumper. It looks nicer and I don't want to plow snow with it again next year. I always stare at the fuel efficiency screen so if it's affected then it's removal is easily reversed.

2. 4' stubby antenna x. $10

3. Blacked out amber side mirror reflectors with plastidip. $10

4. Removed the license plate tray with a delete bracket from rock auto. $15

5. Covered up the wrinkles on the sides of my tri-folding vinyl tonneau cover with two sets of car door protectors. $8

caperJ

Do you have an ebay link?

BC150Fan

Post #5631 Click on link under the picture.

Enginner5

What back up lights did you use?