Best modifications under $50
#5221
iMember
iTrader: (1)
Made my own this way: New tailgate handle: http://pages.ebay.com/link/?nav=item...d=221340553879 This camera fits the camera hole and with a little jb weld on the inside it won't go anywhere: http://pages.ebay.com/link/?nav=item...d=301210015736 Monitor since I don't have a screen or aftermarket stereo to hook up to: http://pages.ebay.com/link/?nav=item...d=171329340261
#5223
Found On Road Dominating
you can buy the mirror with camera in after market stores. Recently seen video on YouTube I'll try to find the link. It was showcasing the entire kit almost plug and play. I'm sure if you buy just the mirror it would work. just need to locate the video wire.
#5226
Project White Fang
Also forgot to post that I installed the door sills yesterday when doing the raptor lights as well. Only the passenger side was done due to the tape not sticking very well on the second one. Didnt want to peel the backing off the third one and be screwed once it was off. Used the leftover 3M tape I had for the one on the back door. I bought some more 3M tape today which i will use on the drivers side Sunday when I get to use my gfs dads garage. Anyway here is a couple pictures of how it turned out. They were originally chrome but I plasti-dipped them white to match the truck better. I would say they turned out good.
Check out my build thread for updated pics once the rest are on. Cost me $35US + $15 US shipping...$50US total, it was a little over $50 after the exchange rate to Canadian. Hopefully no one jumps on me for that lol
Check out my build thread for updated pics once the rest are on. Cost me $35US + $15 US shipping...$50US total, it was a little over $50 after the exchange rate to Canadian. Hopefully no one jumps on me for that lol
Last edited by Black_Thunder; 01-16-2015 at 09:06 PM.
#5227
Also forgot to post that I installed the door sills yesterday when doing the raptor lights as well. Only the passenger side was done due to the tape not sticking very well on the second one. Didnt want to peel the backing off the third one and be screwed once it was off. Used the leftover 3M tape I had for the one on the back door. I bought some more 3M tape today which i will use on the drivers side Sunday when I get to use my gfs dads garage. Anyway here is a couple pictures of how it turned out. They were originally chrome but I plasti-dipped them white to match the truck better. I would say they turned out good. Check out my build thread for updated pics once the rest are on. Cost me $35US + $15 US shipping...$50US total, it was a little over $50 after the exchange rate to Canadian. Hopefully no one jumps on me for that lol
#5228
Project White Fang
eBay, they were on sale over christmas break. Told a few members to make some offers once the price went back up and they were able to get good deals. They are wired to the interior lights, once the door is open they come on and door shuts they go off
The following users liked this post:
fx4in780 (01-18-2015)
#5230
Senior Member